English
Advanced Disc Operations (Continued)
Changing the VFP Setting
The VFP (Video Fine Processor) function enables you to adjust the picture based on the picture tone, or personal preference.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
& During playback
1 Press VFP.
The current VFP setting screen appears on the TV.
NORMAL
GAMMA OFF
BRIGHTNESS +0
CONTRAST +0
SATURATION +0
TINT+0
SHARPNESS +0
Ex.: When “NORMAL” is selected.
2 Press cursor 3/2 repeatedly to select the VFP mode.
• Each time you press the button, the VFP mode changes as follows:
NORMAL “ CINEMA “ USER1 “ USER2 “ (back
to the beginning)
NORMAL | Normally select this. |
CINEMA | Suitable for a movie source. |
|
|
USER1/USER2 | You can adjust parameters that affect the |
| appearance of picture and can store the |
| settings (see below). |
|
|
To turn off the VFP setting screen
Press VFP.
If no operations are done for about 10 seconds
The VFP setting screen disappears.
2 Press cursor ∞/5 repeatedly to select a parameter you want to adjust.
Adjust the parameters so that the picture you are viewing appears as you prefer.
GAMMA | Adjust if the neutral color is bright or dark. |
| The brightness of dark and bright portions is |
| maintained. |
| Available range: OFF, 1 (darkest) to 3 |
| (brightest) |
|
|
BRIGHTNESS | Adjust if the picture is bright or dark as a |
| whole. |
| Available range: |
| (brightest) |
|
|
CONTRAST | Adjust if the far and near position is |
| unnatural. |
| Available range: |
|
|
SATURATION | Adjust if the picture is whitish or blackish. |
| Available range: |
| (whitest) |
|
|
TINT | Adjust if the human skin color is unnatural. |
| Available range: |
|
|
SHARPNESS | Adjust if the picture is indistinct. |
| Available range: |
|
|
3 Press ENTER.
VFP parameters list disappears, and the following
GAMMA 3
GAMMA 3
To adjust the appearance of the picture | Ex.: When “GAMMA” is selected. |
You can adjust the appearance of picture and store in “USER1” and “USER2.”
1 Press VFP, then press cursor 3/2 repeatedly to select “USER1” or “USER2.”
USER1
GAMMA OFF
BRIGHTNESS +0
CONTRAST +0
SATURATION +0
TINT+0
SHARPNESS +3
Ex.: When “USER1” is selected.
4 Press cursor ∞/5 repeatedly to select the value, then press
ENTER.
Your adjustment is stored and the current
VFP parameter list appears again.
5 Repeat steps 2 to 4 to adjust other parameters.
To turn off the VFP setting screen
Press VFP.
To activate your setting
Press VFP, then press cursor 3/2 repeatedly to select “USER1” or “USER2.”
If no operation is done for about 10 seconds
The VFP setting screen disappears.
33
