Manuals / JVC / Home Audio / Speaker System

JVC UX-J99DVD Select the device to record onto, Press AUDIO to turn off the unit if, English

Models: UX-J99DVD

1 96

Download 96 pages 31.61 Kb

Page 75

5 Select the device to record onto.

5 Select the device to record onto.

(1) Press cursor 3/2 repeatedly to select the device.

MD REC TAPE REC

(2) Press SET.

(3)When you select “MD REC,” select the recording length mode (see page 46) by pressing cursor 3/2, then press SET again.

To turn off the Recording Timer after its setting is done

1Press CLOCK/TIMER repeatedly until “REC TIMER” appears on the display.

2Press CANCEL.

The (timer) and REC (recording timer) indicators go off from the display.

To turn on the Recording Timer again

1	Press CLOCK/TIMER repeatedly until “REC TIMER” appears
	on the display.
2	Press SET repeatedly until the settings are shown on the display
	for your confirmation.
	The (timer) and REC (recording timer) indicators light up on
	the display.

English

When you select “TAPE REC,” select Reverse Mode (see page 43) by pressing REV.MODE when you prepare the device.

When recording starts, reverse mode indicator

changes toautomatically.

The REC (recording timer) indicator stops flashing and remains lit. The contents of this setting appear on the display in sequence for your confirmation.

6 Press AUDIO to turn off the unit if

you have set the timer with the unit turned on.

To record onto an MD using the Group recording, press GROUP REC ON/OFF to turn on the Group recording after setting the Recording Timer (before turning off the unit).

Before the start time, the REC (recording timer) indicator and “REC TIMER STANDBY!” start flashing on the display.

REC

Before the shut-off time, the display changes as follows:

MD SP	REC
REC
x 1

•When you press 7 while Recording Timer works

The recording stops but the timer is not canceled. The unit automatically turns off (on standby) when the shut-off time comes.

•If the unit is kept turned on when the start time comes Recording Timer does not work at all.

Clock indication

72

Image 75

JVC UX-J99DVD Select the device to record onto, Press AUDIO to turn off the unit if, English, Md Rec Tape Rec, Press SET

Contents

UX-J99DVD English—Consistsof CA-UXJ99DVDand SP-UXJ99DVD —CA-UXJ99DVDSP-UXJ99DVDCAUTION—button Warnings, Cautions and OthersCaution: Proper Ventilation IMPORTANT FOR LASER PRODUCTSUX-J99DVD UX-J99DVDInstallation PrecautionsIntroduction About This ManualEnglish ContentsEnglish Remote ControlLocation of the Buttons and Controls Remote ControlFront panel Front PanelEnglish 1 2 3 4 5 6Display window Location of the Buttons and Controls ContinuedEnglish Display window on the front panelUnpacking Connecting AntennasPutting the Batteries into the Remote Control Getting StartedConnecting Speakers Getting Started ContinuedEnglish terminal Connecting a TV2Hold the clamp of the speaker terminal 3Insert the end of the speaker cord into theEnglish Connecting Other EquipmentColor system setting Getting Started ContinuedBasic and Common Operations Setting the ClockTurning On the Power and Starting Playback 1 Press CLOCK/TIMERPress FADE MUTING Adjusting the Volume LevelBasic and Common Operations Continued Reinforcing the Bass SoundPress DIMMER while the unit is turned on Adjusting the ToneChanging the Display Brightness Changing the Scanning Mode2 Press Setting the AM Tuner Interval SpacingListening to FM and AM Broadcasts 1 Select the AM channel intervals2 Press SET Presetting StationsTuning in to a Preset Station 1 Tune in to the station you want to presetPlayable disc types Playing Back Discs on the 5-DVDChangerDisc Information Englishchapters While operating a SVCD or VCD using the menuEnglish Disc structure1 Load discs into the 5-DVDchanger Playing Back Discs on the 5-DVDChanger ContinuedLoading Discs Playing Back All the Discs—ContinuousPlayPress ¢ or 4 during playback Basic Disc OperationsPress GROUP/TITLE >>I or GROUP/TITLE I<< during playbackusing the number buttons Press ¡ orPress ¢ or 4 repeatedly Press DISP/CHARAOn the remote control ONLY Playing Back by Using the Disc Menu1 Press TOP MENU or MENU 7When playing a DVD6 Press DVD Programing the Track Playing Order —ProgramPlay3 Press the number buttons to select a disc tray 5 Program other tracks you wantTo check the programed contents Playing at Random—RandomPlayPress 3 Press DVDOn the remote control ONLY Repeating Playback—RepeatPlayProhibiting Disc Ejection—DiscLock Press REPEATEnglish Advanced Disc OperationsAbout the On-screenBar Press ON SCREEN2 Press ENTER Advanced Disc Operations ContinuedOperation through the On-screenBar 1 Press ON SCREEN twice5 Press ENTER 2 Press cursor 3/2 repeatedly toselect highlight on the pull-downmenu 3 Press ENTER1 Press ON SCREEN twice 4 Press cursor ∞/5 repeatedly to select “A-B.”Advanced Disc Operations Continued English1 Press ON SCREEN twice TRACK on the pull-down menuEnglish 5 Press ENTER1 Press SUB TITLE Selecting the Audio LanguageSelecting the Subtitle Language 1 Press AUDIO1 Press ANGLE Selecting a View AngleSelecting Browsable Still Pictures recorded on DVD AUDIOAdvanced Disc Operations Continued Creating a Realistic Sound FieldSelecting the Audio Channel Press VIRTUAL SURROUND2 Press SLOW 9 ¡ or SLOW Special Picture Playback1 Press 8 once 2 Press 8 repeatedly1 Press VFP Changing the VFP Setting5 Repeat steps 2 to 4 to adjust other parameters GAMMAEnglish Playing Back a Bonus GroupKEY 1 Select a bonus groupAdvanced Disc Operations Continued MP3/JPEG Disc PlaybackPress DVD 8 or #¥8 DVD on the unit Press ¢ / 4 repeatedly as many times as required5 For MP3 Operations through the MP3/JPEG CONTROL Screens2 Press cursor ∞/5 repeatedly to select a group 4 Press cursor ∞/5 repeatedly to select a file1 Insert an MD into the MD loading slot Playing Back an MDPlaying Back the Entire MD —NormalPlay Basic MD OperationsEnglish On the remote control ONLYOn the remote control ONLY While playing or pausing3 Press the number buttons to select the tracks Playing Back an MD Continued5 Press MD 1 Load an MD4 Press MD Playing Tracks in a Group—GroupPlay3 Press MD 1 Load an MD including groupsPress REPEAT repeatedly during or before play Repeating Tracks—RepeatPlaySearching for Tracks to Play —MDTitle Search 2 Press TITLE SEARCH5 Press ENTER To cancel title searching, press TITLE SEARCH orAvailable symbols are as follows English2 Press TAPE Playing Back a TapePlaying Back a Tape Press REV.MODE5 Apply sound effects, if you wish 2 Turn down the volume level to “VOLUME MIN.”Listening to External Equipment Listening to External EquipmentAbout the track marks Recording on an MDBefore You Start Recording on an MD EnglishOn the remote control ONLY Setting MD Recording ModesPress LP Press GROUP REC ON/OFF2 Press DISC UP or DISC DOWN to select the disc Recording on an MD ContinuedRecording discs onto an MD —Disc-MDSynchronized RecordingOn the remote control ONLY Recording Other Sources onto an MD1 Prepare the source to record from 2 Insert a recordable MD into the MD loading slotWhen the source is “FM” or “AM,” recording starts On the remote control ONLYOn the remote control ONLY The REC MD recording indicator starts flashingTo protect your recordings Recording on a TapeBefore You Start Recording on a Tape English4 Press TAPE REC Recording on a Tape ContinuedRecording onto a Tape 3 Press REV.MODE to select Reverse Mode6 Press TAPE REC Recording Disc onto a Tape—Disc-TapeSynchronized Recording 4 Press REV.MODE to select a reverse modeOn the remote control ONLY Recording Discs onto an MD and a Tape—DiscSynchronized Recording 4 Press MD&TAPE RECHow to make up Groups Editing an MDGuidance—MDGroup Functions Using MD Groups as a separate itemForming a group FORM GR: Page Editing an MD ContinuedIntroducing Group Editing Functions English8 Press ENTER Forming a Group—FORMGR5 Press SET 7 Press SETEditing an MD Continued Adding a Track to a Group—ENTRYGR4 Press UP ¢ or DOWN 4 to select the track On the remote control ONLYEnglish Dividing a Group-DIVIDEGR6 Press SET 7 Press ENTERWhen “CANNOT JOIN” appears on the display in step Joining Two Groups—JOINGR6 Press ENTER On the remote control ONLY5 Press SET Moving a Group-MOVEGREnglish 3 Press SETloading slot Ungrouping Tracks—UNGROUPDissolving All Groups—UNGRALL 1 Insert an MD you want to edit into the MD3 Press SET Erasing Tracks in a Group—ERASEGROn the remote control ONLY EnglishDividing a track DIVIDE: Page Introducing Track Editing FunctionsEditing an MD Continued English7 Press SET Dividing a Track—DIVIDEEnglish 3 Press SETEnglish Joining Two Tracks—JOINOn the remote control ONLY Editing an MD Continued3 Press SET Moving a Track—MOVEOn the remote control ONLY EnglishEnglish Erasing Tracks—ERASEErasing All Tracks—ALLERASE Editing an MD ContinuedPress GROUP TITLE EDIT Assigning Titles to an MD2 Enter the unit into the title entry mode Press TITLE EDIT8 Press 0 MD eject on the unit to eject 7 Press CANCEL to exit from the title entry mode5 Enter characters 6 Press ENTER to finish the current title entryEnglish 1 Follow steps 1 to 4 on page6 Press ENTER to finish correcting the title Press 0 MD eject on the unit to eject“REC TIMER” appears on the display Using the TimersUsing Recording Timer 1 Press CLOCK/TIMER repeatedly untilTo turn on the Recording Timer again you have set the timer with the unit turned on5 Select the device to record onto 6 Press AUDIO to turn off the unit ifHow Daily Timer actually works Using the Timers continuedUsing Daily Timer 4 Select the source to play backyou have set the timer with the unit turned on 5 Adjust the volume level6 Select the fade setting 7 Press AUDIO to turn off the unit ifUsing the Timers continued Using Sleep TimerTimer Priority Press SLEEP repeatedlyOn the remote control ONLY Initial Setting Using Choice MenuIntroducing the Choice Menus 7Configuration of the choice menus1 Press CHOICE Initial Setting Using Choice Menu continuedOperating Procedure 6 Press ENTER to finish the settingSelect one of the following settings 7Picture setting menu—PICTURESelect one of the following settings Select one of the following settingsSelect one of the following settings 7 Audio selection menu—AUDIOInitial Setting Using Choice Menu continued 7 Other setting menu—OTHERSENTER Restricting the Access Level—ParentalLockEnglish 5 Press ENTERENTER Initial Setting Using Choice Menu continuedEnglish 7 Press ENTEREnglish Country/Area codes list for Parental Lock2 Press and hold TV Changing the Preset Signal Codes1 Set the AUDIO-TVswitch to “TV.” Operating Other Manufacturers’ TVAV COMPU LINK connection Using AV COMPU LINK Control SystemConnection diagram EnglishEnglish GlossaryComponent video signal Composite video signalEnglish MaintenanceCleaning the unit To clean the discATRAC Adaptive TRansform Acoustic Coding/ATRAC3 UTOC User Table Of ContentsAdditional Information MD Disc TypesCause Language Code ListSymptoms SCMS Serial Copy Management SystemMessage SolutionAdditional Information Continued Disc/MD MessagesSignification SolutionEnglish MessageAction TroubleshootingSymptom Possible CauseAmplifier Section—CA-UXJ99DVD SpecificationsSupplied accessories EnglishVICTOR COMPANY OF JAPAN, LIMITED EN, CS2003 VICTOR COMPANY OF JAPAN, LIMITED 1203AIMMDWJEM