English
Operating Other Manufacturers’ TV
Changing the Preset Signal Codes
To operate JVC or other manufacturers’ TV using this remote control:
•Aim the remote control directly at the remote sensor on each equipment.
•Refer also to the manuals supplied with your equipment.
To change the transmittable signals for operating other manufacturers’ TV
1 Set the AUDIO-TV switch to “TV.”
2 Press and hold TV
.
• You need to keep pressing until finishing step 5.
3 Press ENTER.
4 Enter the manufacturer’s code using the number buttons (0 – 9).
See the table on the right to find the code.
5 Release TV
.
6 Press TV
to operate your TV.
If your TV turns on or off, you have entered the correct code.
You can always perform the following operations with buttons listed below:
TV | Turns on or off the TV. |
TV VOL +/– | Adjusts the TV volume. |
| |
TV CHANNEL +/– Changes the TV channels. | |
|
|
TV/VIDEO | Sets the input mode (either TV or |
| VIDEO). |
|
|
After setting the
1 – 9, 0, 100+ | Selects the TV channels. |
| For channel number 5, press 5. |
For channel number 10, press 1, then 0. For channel number 23, press 2, then 3. For channel number 135, press 100+, 3, then 5.
•TV RETURN will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.
•Refer also to the manual supplied for your TV.
•Not all of the functions listed on the left may be assigned to specific buttons for some TVs.
•If you cannot change the channels of some TVs by pressing the number buttons, press CHANNEL + or – for changing the channels.
If there is more than one code listed for your brand of TV
Try each one of the manufacturer’s code until the correct one is entered.
Manufacturer’s code
Manufacturer | Codes |
|
|
JVC | 01* |
|
|
Hitachi | 10 |
|
|
Magnavox | 02 |
|
|
Mitsubishi | 03 |
|
|
Panasonic | 04, 11 |
|
|
RCA | 05 |
|
|
Samsung | 12 |
|
|
Sanyo | 13 |
|
|
Sharp | 06 |
|
|
Sony | 07 |
|
|
Toshiba | 08 |
|
|
Zenith | 09 |
|
|
* “01” is the initial code.
•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
83
