JVC UX-J99DVD manual Playing at Random—RandomPlay, Press DVD, English, Press PLAY/FM MODE

To check the programed contents

On the TV screen:&Before or after playback

Press PLAY/FM MODE.

&During playback

Press 7.

7

English

To exit from Program Play

Before or after play, press PLAY/FM MODE once or twice so that the unit enters another play mode (Random Play or Continuous Play).

The PRGM indicator goes off.

•Turning off the unit also cancels Program Play and changes play mode to Continuous Play. The program you have made will be erased (see the left column).

(On the remote control)							(On the unit)	Playing at Random—Random Play
The programed contents appear on the TV.
To erase the play mode screen, press PLAY/FM MODE again.
								The tracks of all loaded discs will be played at random.
								• Random Play cannot be used on some DVDs.
	PROGRAM							• If a JPEG disc is loaded, it is not played back during Random
	No	Disc		Group/Title	Track/Chapter			Play.
1		3	5		1
2
		5		5		6		• To use Repeat Play (see page 23) with Random Play, press
4		1		2		7
3		2		8		12
5								REPEAT after starting Random Play.
6

7

8

9

10

USE NUMERIC KEYS TO PROGRAM TRACKS.

USE CANCEL TO DELETE THE PROGRAM.

1 Load discs into the 5-DVD changer.

On the display:

Press cursor 5/∞ while Program Play is stopped.

•	∞:	Shows the programed tracks in the
		programed order.
•	5:	Shows them in the reverse order.

To modify the program

You can modify the program before or after playing.

To erase the last step, press CANCEL.

•Each time you press CANCEL, the last programed step is erased.

To add steps in the program before play, simply select the numbers you want to add by pressing the number buttons.

To erase the entire program, press 7 before or after playback.

•Turning off the unit will also erase the program.

7

(On the remote control) (On the unit)

•If the current playing source is not “DISC,” press DVD 3 (or

#¥8 DVD on the unit), then 7 before going to the next step.

On the remote control ONLY:

2 Press PLAY/FM MODE repeatedly until “RANDOM” appears on the display.

The RANDOM indicator also lights up on the display.

RANDOM indicator

1 2 3 4 5 RANDOM

•Each time you press the button, the play mode changes as follows:

PROGRAMRANDOM

(Program Play) (Random Play)

OFF

(Continuous Play)

•During Program Play

You cannot select disc by using DISC UP or DISC DOWN (or DISC SELECT on the unit).

•If you try to program the 100th step

“MEMORY FULL” will appear on the display.

3 Press DVD 3.

The tracks are played at random.

Random Play ends when all the tracks are played once (when Repeat Play is not activated).

To stop during play, press 7.

Playback stops, but Random Play is still activated.

•If your entry is ignored

You are trying to program a track from an empty tray, or a chapter/title/ track/group number that does not exist on the disc (for example, selecting track 14 on a disc that only has 12 tracks). Such entries are ignored, and are erased from the program.

•If the total playing time is 100 minutes or more

To skip the current playing track, press ¢.

•You cannot go back to the previous tracks.

The total playing time on the display will not be shown. “– – : – –” will appear.

22