English
Editing an MD (Continued)
Erasing Tracks—ERASE
This function allows you to erase unwanted tracks. You cannot resume the erased tracks.
Once tracks are erased, the other tracks and/or groups are renumbered.
You can erase up to 15 tracks at a time.
•To stop any time during the editing process below before step 8, press TITLE EDIT.
6 Repeat steps 4 and 5 to select all the tracks you want to erase.
•You can select up to 15 tracks.
7 Press ENTER.
1 Insert an MD you want to edit into the MD loading slot.
On the remote control ONLY:
2 Press TITLE EDIT repeatedly until “ERASE?” appears on the display.
8 Press ENTER.
“EDITING” appears and the REC (MD recording) indicator flashes on the display. Then “WRITING” also flashes while editing you have made is being recorded on the MD.
•If the loaded MD has no track, “ERASE?” will not appear.
•If you want to stop this editing process, press CANCEL.
3 Press SET.
4 Press UP ¢ or DOWN 4 to select the track you want to erase.
•You can also select the track using the number buttons. In this case, the selected track starts playing repeatedly.
5 Press SET.
“” appears on the display.
The track marked with “ | ” will be erased. |
Ex.: When track 5 is selected.
•When you do not want to erase the track, press CANCEL to
remove “ | .” |
Erasing All Tracks—ALL ERASE
This function allows you to erase all the tracks on an MD. You cannot resume the erased tracks.
1 Insert an MD you want to edit into the MD loading slot.
On the remote control ONLY:
2 Press TITLE EDIT repeatedly until “ALL ERASE?” appears on the display.
•If you want to stop this editing process, press CANCEL.
3 Press SET.
•To cancel the setting, press CANCEL.
4 Press ENTER.
“EDITING” appears and the REC (MD recording) indicator flashes on the display. Then “WRITING” also flashes while editing you have made is being recorded on the MD.
“BLANK DISC” appears on the display.
67
