JVC UX-J99DVD manual Recording Other Sources onto an MD, Prepare the source to record from

To record a single track during play or pause

While playing back or pausing a track you want to record, press MD REC.

(On the remote control) (On the unit)

The playback of the track is stopped, and the same track starts playing from the beginning again. This time, the MD recorder starts recording the track. The REC (MD recording) indicator flashes on the display.

•After the track is recorded, both the disc player and the MD recorder stop automatically.

“WRITING” flashes on the display.

•When recording a chapter on DVD VIDEO

The playback of the chapter does not start playing from the beginning again. The recording starts from the point when you press MD REC.

•When you press MD REC while pausing a track Recording starts from that point.

•To record from the desired track

Select the track before playback, then press MD REC.

To change the information shown on the display

On the remote control ONLY:

Press DISP/CHARA.

•Each time you press the button, the recording indications, the current track numbers of both the disc and the MD, and the clock indication appear in sequence on the display.

C D	MD
1 2 3 4 5	REC LP 2
	GROUP x 1

Elapsed playing time

C D	MD
1 2 3 4 5	REC LP 2
	GROUP x 1

Remaining recording time

C D	MD
1 2 3 4 5	REC LP 2
	GROUP x 1

Current MD track number Current group number*

C D	MD
1 2 3 4 5	REC LP 2
	GROUP x 1

*If the loaded MD does not contain any group or more than 99 groups, “G – –” will appear on the display.

English

Recording Other Sources onto an MD

1 Prepare the source to record from.

To record from FM/AM broadcasts:

(1)Press FM/AM/AUX (or FM/AM on the unit) to select either “FM” or “AM.”

AUX

FM/AM

(On the remote control) (On the unit)

(2) Tune in to a preset station you want (see page 14).

To record from a tape:

(1)Insert a cassette into the cassette loading slot.

•If the current playing source is not “TAPE,” press TAPE 2 3, then 7 before going to the next step.

(2)Press REV.MODE to select Reverse Mode (see page 43).

To record from external equipment:

Press FM/AM/AUX (or AUX on the unit) to select “AUX” or “AUX-DIGITAL” and prepare the external equipment to play.

AUX

FM/AM

(On the remote control) (On the unit)

•Adjust the audio input level if necessary (see page 44).

•For operation of the external equipment, see the manuals supplied with it.

2 Insert a recordable MD into the MD loading slot.

•Set the MD recording length mode, “LP:”-prefix addition mode, and group recording mode (see “Setting MD Recording Modes” on page 46).

48