Philips SL-0627/94-1 Select an item and press OK, To reset to default TV colour system manually

PAL – Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format.

NTSC – Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format.

Multi – Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

below:

Press 2 to select {VIDEO SETUP PAGE}.

Press SETUP.

1

2

3 Press 3 4 to highlight {TV TYPE}, then press 2.

TV Type TV Display Progressive Picture Setting

NTSC TV

PAL

Multi

NTSC

Selecting the colour system that corresponds to your TV

This DVD player is compatible with both NTSC and PAL. In order for a DVD disc to play on this player, the colour system of the Disc, the TV and the DVD player should match.

- - Video Setup Page - -

Getting Started

5Select an item and press OK.

➜ Follow the instructions shown on the TV to confirm the selection (if any).

Helpful Hints:

–Before changing the current TV Standard setting, ensure that your TV supports the ‘selected TV Type’ system.

–If there is no proper picture on your TV, wait for 15 seconds for auto recovery.

CHANGING PAL TO NTSC:

1.ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD.

2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVERY.

OK

CANCEL

CONFIRM AGAIN TO USE NEW TV TYPE SETTING.

OK

CANCEL

To reset to default TV colour system manually:

● Wait for 15 seconds for auto recovery.

4 Press 3 4 to highlight one of the options

OR

1 Press OPEN CLOSE 0 on the DVD player to open the disc tray.

2 Press numeric keypad ‘3’ on the remote control for few seconds.

➜ The DVD background screen appears on the TV.

TIPS: The underlined option is the factory default setting.

Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.

17

01-45_DVP5150_94_eng_RC2 17 07/07/06, 10:34 AM