Sound and Volume Controls
Setting the speakers’ channels
You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.
IMPORTANT!
The speaker settings only available on
1Press STOP then, press SETUP.
2Press 2 repeatedly to select {AUDIO SETUP PAGE}.
3Press 34 to highlight {SPEAKER SETUP}, then press 2.
- - Audio Setup Page - -
Analog Output
Digital Audio Setup
PRO Logic II
Dolby Digital Setup
Sound Mode
Speaker Setup
CD Upsampling
- - Speaker Setup Page - -
Front Speakers | Large |
Center Speaker | Small |
Rear Speakers |
|
Subwoofer |
|
Speakers Volume |
|
Speakers Delay |
|
4Enter its submenu by pressing 2.
5Press 34 to highlight one of the options below at a time, then press 2.
{FRONT SPEAKERS, CENTER SPEAKER, REAR SPEAKERS}
OFF – when no speaker is connected. LARGE – when connected speakers can produce low frequency signals below 120Hz.
SMALL – when connected speakers cannot produce low frequency signals below 120Hz.
{SUBWOOFER}
ON – when a subwoofer is connected. OFF – when no subwoofer is connected.
{SPEAKER VOLUME} – Volume level setting for individual speakers
- - Speakers Volume Setup - - |
| ||
Front Left | 0dB0 | ||
|
|
| 0dB0 |
Front Right |
|
| |
|
|
| 0dB0 |
Center |
|
| |
|
|
| 0dB0 |
Subwoofer |
|
| |
|
|
| 0dB0 |
Rear Right |
|
| |
|
|
| 0dB0 |
Rear Left |
|
| |
|
|
| 0dB0 |
Surr Right |
|
| |
|
|
| 0dB0 |
Surr Left |
|
| |
{SPEAKER DELAY} – Delay times setting in relation to the listening position/ distance for centre and surround speakers (1m ~ 10m).
- - Speakers Distance Setup - - |
| |
Center | 1.0M | |
|
| 1.0M |
Subwoofer |
| |
| 1.0M | |
Rear Right |
| |
| 1.0M | |
Rear Left |
| |
| 1.0M | |
Surr Right |
| |
| 1.0M | |
Surr Left |
| |
6Press 1 2 to adjust the setting that best suits your surround sound needs.
7Press OK to confirm.
Helpful Hints:
–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.
–The test tone will be automatically generated to help you judge the sound level of each speaker.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
39
39 | 07/07/06, 10:35 AM |
