Philips EXP2540/02 Indication Err is displayed, Music files do not play, CD skips tracks

Troubleshooting

WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, first check the points listed, before taking the unit for repair. If you are unable to solve a problem by follow- ing these hints, consult your dealer or service center.

The CD player has no power, or playback does not start

•Check that your batteries are not dead or empty, that they are inserted correctly, that the contact pins are clean.

•Your adapter connection may be loose. Connect it securely.

•For in-car use, check that the car ignition is on. Also check player‘s batteries.

The indication Err is displayed

•Check that the CD is clean and correctly inserted (label-side upward).

•If your lens has steamed up, wait a few minutes for this to clear.

Music files do not play

• Check that the file names of MP3 files end with .mp3.

Some directories missing on MP3 CDs

•Check that the total number of files and albums on your MP3 CDs does not exceed 999.

•Only albums with MP3 files are shown.

The CD skips tracks

•The CD is damaged or dirty. Replace or clean the CD.

•SHUFFLE is active. Switch off whichever is on.

Music skips or popping sounds when you play a MP3 track

•Play the music file in your computer. If the problem remains, encode the audio track again and make a new CD.