21Connect Peripheral equipment
&Connect your camera or camcorder at the front side of your receiver (A/V4).
éConnect the equipment to VIDEO 2and AUDIO L 1for mono
equipment.
“For stereo equipment also connect AUDIO R 1.
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VHS input 3 and AUDIO inputs 1.
Camera & camcorder
CVBS/RGB input
S•VHS
VIDEO
AUDIO
L
R
1 2 3
The euroconnector A/V3 can be used for special applications.
&Connect the audio cable to the Dolby Pro Logic Surround receiver input and
to AUDIO OUT L and Rat the back of your receiver box.
éIf you want the loudspeakers of your monitor to act as centre speaker, also
connect an audio cable to the Dolby Pro Logic Surround receiver output and
to the SURROUND SOUND CENTRE IN at the back of your receiver box.
“Select Centre Mode On in the Setup menu. See p. 8.
In the Sound menu only the volume menu item and the headphone menu can
be controlled.
The loudspeakers of the monitor will now only produce centre sound, the
loudspeakers connected to the audio receiver will produce Surround Sound.
Dolby Pro Logic Surround receiver
OUT
NO FUNCTION
IN
VGA
MONITOR
OUT
AUDIO
MONITOR
SURR. SOUND
CENTER
IN
AUDIO
MONITOR
VGA
MONITOR
IN
LR
LR
L
R
AUDIO
AUDIO
OUT
&Connect the three separate component video cables to the DVD player’s Y,
Cb and Cr jacks and to the Y,Cb and Cr A/V6 IN jacks on the receiver.
éConnect the audio cable to the DVD player’s AUDIO L and Rjacks and to
the Land R AUDIO A/V6 jacks on the receiver.
DVD player
LR
YCb
NO FUNCTIONCr
A/V
IN
6
AUDIO