Philips FW-C150 manual Timer Sleep Timer, Timer Setting

(only on remote

22 TIMER SLEEP TIMER

5Press CLOCK•TIMER again to store the setting.

™ The clock starts.

•To exit without storing the setting, press Çon the system.

Notes:

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–When a power interruption occurs, the clock setting is erased.

Timer Setting

•The system can switch on to CD or TUNER mode automatically at a preset time. It can serve as an alarm to wake you up.

•Before setting the timer, make sure the clock is set correctly.

•The timer will always be switched on once it is set.

•The volume of the timer will increase from the minimum level to the most recently selected volume level.

1Press and hold CLOCK•TIMER for more than two seconds to select timer mode.

™“TU__XX:XX” or “CD__XX:XX"

starts flashing. "XX:XX" is “12:00

AM“ or “00:00” or the last timer setting, depending on whether 12- or 24-hour mode has been selected.

™The TIMER starts flashing.

2Press CD or TUNER to select the desired source.

™“TU__XX:XX” indicates the Tuner mode is selected.

™“CD__XX:XX" indicated the CD

mode is selected.

•Before selecting CD, make sure a disc is loaded in the CD changer tray.

3Press à or á on the system to set the hour for the timer to start.

4Press í or ë on the system to set the minute for the timer to start.

5Press CLOCK•TIMER to store the start time.

™The timer is now set.

™The TIMER remains on the display.

• At the preset time, the timer will be activated.

™The selected source will be played.

Notes:

–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.

–If the source selected is TUNER, the last tuned frequency will be switched on.

–If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, the TUNER will be selected instead.

–The timer will not activate if a recording is in progress.

To switch off the TIMER

1Press and hold CLOCK•TIMER for more than two seconds.

2Press Ç on the system to cancel the timer.

™The timer is now switched off.

™The display will show "OFF" and the TIMER disappears.

To start the TIMER again (for the

same preset time and source)

1Press and hold CLOCK•TIMER for more than two seconds.

2Press CLOCK•TIMER again to store the start time.

™The timer is now on.

™The TIMER appears on the display.

Sleep Timer control)

This feature allows you to select a length of time after which the system will switch to the standby mode automatically.

1Press SLEEP on the remote control repeatedly to select a period of time.

™The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60

™ OFF ™ 15 …

™"SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes.

2When you reach the desired length of time, stop pressing the SLEEP button.

™The SLEEP display lights up.

™The Sleep Timer is now set. Before the system switches to standby mode, a countdown of 10 seconds will be displayed.

"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1" ™ "SLEEP"

While SLEEP mode is activated

•Press SLEEP once to view the remaining length of time.

•Press SLEEP twice to change the pre-selected period of time.

™The display will show the remaining time followed by the sequence of sleep timer options.

To switch off the Sleep Timer

•Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY-ONbutton.

pg 01-28/C150/37-En 22 12/6/00, 2:18 PM 3139 115 20541 (ENG)