13 | OPERATING THE SYSTEM |
|
Easy Set
EASY SET allows you to store all available radio stations automatically.
• Press and hold STANDBY ON (on |
the system only) for five seconds |
when the system is in standby or |
demonstration mode. |
™ “EASY SET” will be displayed, |
and followed by “TUNER” and |
then “AUTO”. |
™ EASY SET will start searching for |
all radio stations on FM band and |
then followed by radio stations on |
AM band. |
Switching the system ON
•Press CD, TUNER, TAPE or AUX.
You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.
Switching the system to standby mode
•Press STANDBY ON or B on the remote control.
™The system will switch to standby mode.
DIM mode
You can select the desired brightness for the display.
•Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
™The DIM display lights up.
™"DIM 1", "DIM 2", "DIM 3" or "DIM OFF" will be displayed depending on the mode selected.
DIM OFF - normal brightness with Spectrum Analyzer On
DIM 3 - half brightness with Spectrum Analyzer Off and all LEDs on the system will be switched off.
Sound Control
VOLUME ADJUSTMENT Adjust MASTER VOLUME to increase or decrease the sound level.
For Personal Listening
™ All available radio stations with |
sufficient signal strength will be |
stored. Up to 40 presets may be |
stored. |
Notes:
–EASY SET will start with the FM band, if there are still presets available, the system will continue to store the AM band.
–When EASY SET is used, all previously stored radio stations will be replaced.
–The last preset radio station will appear on the display when EASY SET is completed.
Selecting the Source
•Press the respective source selection button: CD, TUNER, TAPE or AUX.
™The display indicates the selected source.
Note:
–For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals.
DIM 1 - normal brightness with Spectrum Analyzer Off
DIM 2 - half brightness with Spectrum Analyzer On
Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.
pg | 13 | 2/16/00, 9:01 AM | 3139 116 19811 (ENG) |
