27
English
3140 115 xxxxx

Listening to external sources

1Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
2Press AUX to select external equipment.
➜"AUX" or "CDR" is displayed.
External Sources
Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
Clock/Timer

Sleep timer setting

The sleep timer enables the system to switch to
standby mode automatically at a preset time.
1Press SLEEP on the remote control repeatedly
to select a preset time.
➜The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 …
➜"SLEEP XX" or "OFF" is displayed. "XX" is
the time in minutes.
2When you reach the desired length of time, stop
pressing the SLEEP button.
➜SLEEP is shown, except for "OFF" mode.
➜The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To check the remaining length of time
after sleep timer is activated
●Press SLEEP once.
To change the preset sleep timer
●Press SLEEP again while the remaining sleep
timer is shown.
➜The display will show the next sleep timer
options.
To deactivate the sleep timer
●Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.