Using the remote control to operate the system
1 Aim the remote control directly at the remote sensor (iR) on the main unit.
2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER).
3 Then select the desired function (for example ÉÅ, í, ë).
CAUTION!
– Remove batteries if they are exhausted or will not be used for a long time.
– Do not use old and new or different types of batteries in combination.
– Batteries contain chemical substances, so they should be disposed of properly.
14
Close the cover.
3
3
1
2
1 Open the battery compartment cover.
2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment.
Step 5:
Inserting batteries into the remote control
Connections
E n g l i s h
