Philips FW-C50, FW-C70 manual Storing Preset Stations, Tuning to Preset Radio Stations, Tuner

Models: FW-C50 FW-C70

1 28
Download 28 pages 47.54 Kb
Page 17
Image 17
Storing Preset Stations

17

TUNER

Storing Preset Stations

You can store up to 40 radio stations in the memory.When a preset radio station is selected, the preset number appears next to the frequency on the display.

Automatic programming

1Press TUNER (FM•AM).

2Press PROG for more than one second.

ªThe PROGRAM starts flashing and “AUTO” will be displayed.

ªThe system will search for every available radio station in the FM waveband first, then search the AM waveband.

ªAll available radio stations will be stored automatically.The frequency and preset number will be displayed briefly.

ªThe system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used.

ªThe system will remain tuned to the last stored preset radio station.

Notes:

You can cancel the automatic programming by pressing PROG or (on the system only).

If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed.

Manual programming

1Press TUNER (FM•AM).

2Press TUNER (FM•AM) again to select the desired waveband : FM or AM.

3Press PROG for less than one second.

ªThe PROGRAM starts flashing.

ªThe next available preset number will be displayed for selection.

4Press ˆ or to tune to the desired frequency.

If you wish to store the radio station to another preset number, press 4

or 3 to select the desired preset number.

5Press PROG again.

ªThe PROGRAM disappears and the radio station will be stored.

Repeat steps 3 – 5 to store other preset radio stations.

Notes:

When 40 radio stations are stored and you attempt to store another radio station, the display will show "FULL”. If you want to change an existing preset number, repeat steps 3 – 5.

You can cancel manual programming by pressing (on the system only).

During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.

Tuning to Preset Radio Stations

Press 4 or 3 to select the desired preset number.

ªThe preset number, radio frequency, and waveband appear on the display.

pg 01-28/C50-C70/37-Eng

17

18/11/1999, 2:39 PM

3139 116 19441 (ENG)

Page 17
Image 17
Philips FW-C50 Storing Preset Stations, Tuning to Preset Radio Stations, Tuner, Automatic programming, Manual programming