15
English
Functional Overview
Controls on the system
1ECO POWER
–to switch the system on or to Eco Power
Standby mode.
2STANDBY ON2
–to switch the system on or to Standby mode.
3DISPLAY SCREEN
–to view the current status of the system.
4DISC TRAYS
5DISC CHANGE
–to change disc(s).
6DISC 1 / DISC 2 / DISC 3
– to select a disc tray for playback.
7OPEN•CLOSE
–to open or close the disc tray.
8INTERACTIVE VU METER
– to show the VU (volume unit) meter in music or
volume mode depending on the display mode
selected.
9SENSOR
– point the remote control towards this sensor.
0VOLUME
–to increase or decrease the volume.
!Ta pe Deck Operation
AUTO REPLAY
–to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING
–to dub a tape.
REC
–to start recording on tape deck 2.
@VOCAL
– to fade out the original vocal from Karaoke or to
switch between mono or stereo mode during
audio disc playback.
#JOG CONTROL
– to select the desired sound effect for the
selected sound feature.
$KEY CONTROL
– to change the tone level to suit your vocal range.
I.................to decrease the key tone level.
.................to restore the key tone level to
original setting.
i .................to increase the key tone level.
%ECHO
– to adjust the echo level for karaoke after
inserting the microphone.
^SOUND
– to activate or deactivate the surround sound
effect.
&MAX SOUND (MAX)
–to activate or deactivate the optimal mix of
various sound features.
*MIC/LEVEL
– to connect microphone jack.
–to adjust the mixing level for karaoke or
microphone recording.
(0
–to open the tape deck door.
)TAPE DECK 1
¡TAPE DECK 2
™SOURCE
–to select the following:
DISC (DISC 1•2•3)
–to select disc tray 1, 2 or 3
TUNER (BAND)
–to select waveband: FM or MW.
TAPE (TAPE 1-2)
–to select tape deck 1 or 2.
AUX/TV
–to select a connected external source: TV/CDR
or AUX (auxiliary) mode.
£Mode Selection
PLAY/PAUSE 38
for DISC .................... to start or interrupt playback.
for TAPE ..................... to start playback.
for PLUG&PLAY ... (on the system only) to initiate
plug & play mode.
SEARCH•TUNING 1 ¡
(ALBUM – / +)
for DISC .................... to search backward/forward.
for TAPE ..................... to rewind or fast forward.
for TUNER ............... to tune to a lower or higher
radio frequency.
for CLOCK .............. (in standby mode)to set the
minute and hour.
DEMO STOP/CLEAR 7
for DISC .................... to stop playback or to clear a
programme.
for DEMO ................ (in Standby or ECO power
mode) to activate/deactivate
demonstration.
for PLUG&PLAY ... (on the system only) to exit
plug&play mode.