17
English
Functional Overview

Remote control

Notes:
First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
Then select the desired function (

2

,

4

,

¢

for example).
1SOURCE
to select the relevant active mode: TAPE, DISC,
TUNER or AUX/TV.
TUNER: toggles between FM and MW band.
–AUX/TV: toggles between AUX-ANA and AUX-
DIG(Digital Input) mode.
2DISC MENU (disc mode only)
to enter or exit the disc contents menu.
3SYSTEM MENU (disc mode only)
to enter or exit the system menu bar.
43 / 4 / 1 / 2
in Tuner mode, to select a preset radio station
number ( 1 or 2).
to select movement direction in disc contents
menu/system menu bar.
54 / ¢
in Disc mode, press to skip to the previous/next
chapter/track.
in Disc mode, press and hold to fast reverse/
forward the disc.
in Tuner mode, to tune to a lower or higher
radio frequency.
6PLAY/PAUSE 2;
to start or interrupt disc playback.
7STOP 9
to stop playing the disc.
8SURROUND
to select multichannel surround (Dolby Digital,
DTS and VSS) or stereo sound effect.
9SOUND
to select various sound effect: CONCERT,
DRAMA, ACTION,SCI-FI, CLASSIC, JAZZ,
ROCK, DIGITAL, MAX ON or MAX OFF.
0MODE
to select the REPEAT or SHUFFLE function.
!REPEAT A-B
to repeat a specific section on a disc.
@POWER 2
to switch to standby mode.
#Numeric Keypad (0-9)
to enter a track/title number of the disc.
to enter a number of preset radio stations.
$VOL +/-
adjust the volume level.
%OK
to exit or confirm the selection.
^RESUME
to continue disc playback after interruption.
&MUTE
to interrupt or resume sound reproduction.
*NIGHT (Dolby Digital mode only)
to optimize the dynamic effect of the sound
output.
(DIM
to select different brightness for the display.
)SLEEP
to set the sleep (auto-off) timer function.
¡SUBW +/-
to adjust the subwoofer’s level.
REAR +/-
to adjust the rear speakers’ level.
CENTER +/-
to adjust the center speaker’s level.
TV VOL+/-
to adjust Philips’ television volume level.