Basic Functions
Demonstration mode
The system has a demonstration mode that shows the various features offered by the system.
To activate the demonstration
●In Standby mode, press and hold DEMO STOPÇon the system until "DEMO ON" is
displayed.
➜ The demonstration will begin.
To deactivate the demonstration
●Press and hold DEMO STOP Çon the system until "DEMO OFF" is displayed.
➜ The system will switch to Standby mode.
Note:
–Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again.
Switching the system to Standby mode
In Demonstration mode
●Press and hold DEMO STOP Ç on the system.
In any other source mode (except Eco Power Standby mode)
●Press STANDBY ON (or B on the remote control).
➜ The clock will appear on the display when the system is in Standby mode.
Note:
–If you have not deactivated the demonstration, it will resume five seconds after the system switches to Standby mode.
E n g l i s h
Switching the system on
In Standby/Demonstration mode
●Press STANDBY ON.
➜The system will switch to the last selected source.
●Press VCD, TUNER, TAPE, AUX (or
VCD 123/MP3 123, TUNER, TAPE 1/2 or AUX on the remote control).
➜The system will switch to the selected source.
●Press any one of the DISC DIRECT PLAY buttons.
➜The system will switch to CD mode.
In Eco Power Standby mode
●Press ECO POWER.
➜The system will switch to last selected source.
●Press CD 123, TUNER, TAPE 1/2 or AUX/CDR on the remote control.
➜The system will switch to the selected source.
Switching the system to Eco Power Standby mode (< 1 Watt)
●Press ECO POWER (or press and hold B on the remote control).
➜"ECO POWER" will be displayed, then the display screen will go blank.
➜The low power ECO POWER LED will be lighted.
Note:
–If you have not deactivated the demonstration, it will resume five seconds after the system switches to Eco Power Standby or Standby mode.
Power Saving Automatic Standby
As a
15
pg | 15 | 4/16/02, 6:43 PM 3139 115 21281 |