Dubbing tapes (from tape deck 2 to tape deck 1)
1Load the prerecorded tape into tape deck 2 and a blank tape into tape deck 1.
ªMake sure that both tapes have their full spool to the left.
2Press DUBBING to switch between normal and high speed dubbing.
ª"NORMAL" (normal speed) or "FAST" (high speed) will be displayed.
ªHSD flag appears on the display for high speed dubbing.
3Press PAUSE on tape deck 1.
4Press RECORD on tape deck 1.
5Press PLAY on tape deck 2.
ªRecording will start automatically.
ªThe REC flag starts flashing.
6Press STOP•OPEN on tape deck 1 and tape deck 2 to stop dubbing.
Notes:
–At the end of side A, flip the tapes to side B and repeat the procedure.
–Dubbing of tapes is only possible from tape deck 2 to tape deck 1.
–To ensure good dubbing, use tapes of the same length.
–During high speed dubbing in Tape mode, the sound is reduced to a low volume.
CD Synchro Start Recording
During CD synchro start recording,
•It is not advisable to fast forward/rewind your tape in tape deck 2.
•It is not possible to listen to another source.
1Load a blank tape into tape deck 1 and a disc into the disc tray.
2Press CD.
•You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, the tracks are recorded according to the selected disc.
3Press RECORD on tape deck 1 to start recording.
4Press STOP•OPEN on tape deck 1 to stop recording and STOP•CLEAR ‚to stop CD playback.
Recording from other sources deck 1)
1Load a blank tape into tape deck 1.
2Press CD, TUNER, TAPE or AUX.
• Start playback of the selected source.
3Press RECORD on tape deck 1 to start recording. ª The REC flag is flashing.
4Press PAUSE to interrupt recording.
5Press STOP•OPEN on tape deck 1 to stop recording.
Note:
–During recording, it is not possible to listen to another sound source.
RECORDING
English
23
