Philips FWC579 warranty Connecting to game woofer, Connecting the AC power cord, Connections

Using the remote control to operate the system

1 Aim the remote control directly at the remote sensor (iR) on the main unit.

2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER).

3 Then select the desired function (for example ÉÅ, í, ë).

CAUTION!

– Remove batteries if they are exhausted or will not be used for a long time.

– Do not use old and new or different types of batteries in combination.

– Batteries contain chemical substances, so they should be disposed of properly.

Close the cover.

3

3

1

2

1 Open the battery compartment cover.

2 Insert two batteries type R06 or AA, following the indications (+-) inside the compartment.

Step 7:

Inserting batteries into the remote control

E n g l i s h

Connections

Step 5: Connecting to game woofer

Use the supplied game woofer cable to connect the SUBWOOFER OUT terminal to the SIGNAL INPUT on the game woofer.

Setting the game woofer

1

2

1After connecting the game woofer’s AC power cable to the wall socket, press POWER ON • OFF to activate the game woofer.

2Adjust the VOLUME CONTROL to increase or decrease the game woofer volume level.

3Play sound through the game woofer and adjust the PHASE SELECT button at the rear of the game woofer to the position (IN or OUT) at which the lowest frequency is heard best.

➜ Phase is closely related to the distance from the listening position to the front speakers and game woofer.

4To switch off the game woofer, press POWER ON•OFF again.

Step 6: Connecting the AC

power cord

"AUTO INSTALL – PRESS PLAY" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time.

Press ÉÅ on the main unit to store all available radio stations (page 3 – P3) or press Ç to exit (refer to “Tuner Operations”).

14