3
AV IN
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1Turn on the system.“AUTO INSTALL PRESS PLAY” will be displayed.
2Press PLAY 2; on the system to start installation.
Playing a disc
3Press DISC on the remote control.You can also select the DISC on the front panel.
4 Turn on the TV and select the correct Video mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).
5Press OPEN0CLOSE on the front of the DVD system and load discs, then press the
corresponding OPEN0CLOSE again to close the disc tray.
Make sure the disc label is facing up. For
If a disc menu appears, use 1/¡/5/4 buttons on the remote control to make the necessary selection, then press OK to confirm. Or use the numeric keypad on the remote control to select features. Follow the instructions given in the disc menu.
7 To stop playback, press STOP 9.Region Codes
DVDs must be labeled for ALL regions or Region 3 , in order to play on this DVD system.
3
You should find the below accessories in the packaging box.
Audio cable | MW | loop | FM antenna | DIN OUT cable | |
( white , red ) | |||||
antenna |
|
| |||
Remote control and | Composite vide | Component vide cable | AC Power cable | ||
AAA sise batteries | cable ( yellow ) | ( red , blue , green ) | (2 pieces) |
Detailed playback features and additional functions are described in the