Displays and Controls
Remote Control
This page describes the buttons on the remote control used to operate the receiver.
1 Remote Control Display Screen
2 SOURCE button
Use this button to turn on/off other components. You must input the preset code in order to use this function (see page 67).
TV button
This is a dedicated TV button. Use it to turn on/ off your TV.
3 MULTI CONTROL buttons
These buttons are the basic controls that switch the mode of the receiver and the remote control, which allows you to control your other components.
TV CONT: Press so that the remote control can operate the TV control commands.
4 Number buttons
These can be used for many purposes depending on the mode of the remote control.
When in receiver mode the buttons operate as below:
DIMMER button (see page 57)
Use to adjust the brightness of the receiver's display.
LOUDNESS button (see page 52)
Switches the LOUDNESS mode on or off.
TONE button (see page 53)
This button switches between TONE on and off, which bypasses the tone circuitry.
BASS/TREBLE buttons (see page 53)
Use to select whether the bass or treble will be adjusted.
(+/–) buttons
Use to adjust the TONE level, effect level, channel level and sound delay as well as make Dolby Pro Logic II MUSIC parameter settings.
32
En
