Connecting Your Equipment
Connecting Satellite TV (SAT) Components
Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
Hook up the video signal with either component video, S video, or composite video cords, depending on how you connected the receiver to your TV (see page 16).
For the audio signal, in order to use digital soundtracks broadcast you must hook up a digital input. Use either a coaxial or optical cable, it doesn't matter which (see page 23). We recommend hooking up your audio with analog cables as well (see below).
*The arrows indicate the direction of the TV signal.
(AUDIO)
Satellite tuner
S400
S400
(Single)
Memo:
•If your digital connections are different than the default settings (see page 23) you will need to assign the digital jacks to the proper component(s).
PREPARATION
19
En
