Pioneer VSX-AX5i-G manual Naming Memorized Stations, Basic

Using the Tuner

Naming Memorized Stations

You can input a name of up to four characters for each preset station in the receiver’s memory (see the previous page). This name can be anything you choose. For example, you could input JAZZ for that station and when you listen to it the name, rather than the frequency number, will appear on your display.

1 Press the TUNER button on the remote control.

2 Press CLASS repeatedly to select the class.

Repeatedly pressing this button cycles through the three available classes, A, B and C.

3 Press STATION + or STATION – to select the preset channel.

4 Press TUNER EDIT to select the station name mode.

European model
					5	Enter the station name you want.
						Names can be up to four characters long.
						•	Use the MULTI JOG dial (front panel) or the  but-
							tons (remote) to select characters.
						•	Press ENTER to confirm a character. If no character is
							input, a space is input.
						To erase a station name, simply repeat steps 1-4 and input
1,5	5,6	2	3	4		four spaces instead of a name.
						The possible selections are shown below.
							ABCDEFGHIJKLMNOPQRSTUVWXYZ
multi-voltage model							abcdefghijklmnopqrstuvwxyz
							0123456789
							!”#$%&’()*+,–./:;<=>?@[ \ ]ˆ_{} [space]
					6	Press ENTER when you have got the
						characters you want to enter.
						Repeat steps 2 to 5 to memorize up to 30 preset broadcast
						station names.
					Memo:
					To change a station name, enter a new name over the top of
					the existing one.
1,5	5,6		2	3	4

BASIC

61

En