Displays and Controls
Display
All the display information is explained and/or referenced here.
1SIGNAL indicators
Light to indicate the input signal you selected. AUTO: Lights when the receiver is set to select the input signal automatically.
DIGITAL: Lights when digital audio signals are selected.
ANALOG: Lights when analog signals are selected.
2Digital format indicators
PRO LOGIC II: Lights during Dolby Pro Logic II processing.
NEO:6: Lights during NEO:6 processing.
2 DIGITAL: Lights when a Dolby Digital signal is detected.
DTS: Lights when a DTS signal is detected.
ES: Lights when playing back a DTS ES signal.
EX: Lights when playing back a Dolby Digital EX signal.
STEREO: Lights during
3LOUDNESS indicator
Lights when LOUDNESS is on.
4MIDNIGHT indicator
Lights when MIDNIGHT is on.
5TONE indicator
Lights when the TONE control is on.
6DNR indicator
Lights when DIGITAL NR is on.
7TUNER indicators
STEREO: Lights when an FM stereo broadcast is received in the auto stereo mode.
MONO: Lights when the tuner is set to receive FM broadcasts and when MPX mode is selected. TUNED: Lights when a broadcast is received. RF ATT (European model only): Lights when the RF ATT is on (see page 58).
RDS (European model only): Lights when an RDS broadcast is received.
EON 
(European model only): EON lights when it has been set. The dot indicator next to it lights when the station you are currently tuned to carries the EON data service.
8 | Volume level indicator | PREPARATION | |
9 | |||
| |||
| Lights when the AUDIO SCALER mode is on. |
| |
10 | DSP indicators |
| |
| MOVIE: Lights when a MOVIE mode is selected. |
| |
| When a DSP MOVIE mode is selected DSP will |
| |
| light with a box around it. |
| |
| MUSIC: Lights when a MUSIC mode is selected. |
| |
| When a DSP MUSIC mode is selected DSP will |
| |
|
| ||
| light with a box around it. |
| |
11 | Speaker indicators (see page 76) |
| |
| Lights to indicate the current speaker system, A |
| |
| and/or B. |
| |
12 Program Format indicators |
| ||
| For Dolby Digital or DTS sources: These |
| |
| indicators change according to which channels |
| |
| are active in the source. When all three LS (left |
| |
| surround), S (surround) and RS (right surround) |
| |
| light at the same time it means a source with a |
| |
| 6.1 channel playback flag is being used. |
| |
| L – Left front channel. |
| |
| C – Center channel. |
| |
| R – Right front channel. |
| |
| LS – Left surround channel. |
| |
| S – Surround channel or Surround back channel. |
| |
| RS – Right surround channel. |
| |
| LFE – Low Frequency Effects channel. |
| |
| – Lights when LFE signal is input. |
| |
13 | SB CH indicators (see page 55) |
| |
| Light to indicate the status of the surround back |
| |
| channels. |
| |
AUTO – Lights when the SB CH MODE or virtual surround back mode is set to AUTO.
ON – Lights when the SB CH MODE or virtual surround back mode is set to ON.
OFF – Lights when the SB CH MODE or virtual surround back mode is set to OFF.
35
En
