UsingOtherOtherFunctionsFunctions
Recording from Audio/Video Components
The following explanations show you how make a recording from one component to another connected to this receiver. Note that an analog recorder (such as a VCR) cannot record from a source that is connected using only a digital connection. Likewise, a digital recorder (such as a
When recording from one digital component to another, bear in mind that the digital signal output from this receiver mirrors the input from the source. So if the input is, say, Dolby Digital, the output will also be Dolby Digital. Before recording, make sure that the recorder is compatible with the source digital audio format.
See page 20 for more on analog audio connections and page 22 for digital audio connections.
Memo:
•The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS, ACOUSTIC EQ and surround effects have no effect on the recorded signal, except in PHONO. Thus when recording in PHONO function DIRECT is best used.
•In some cases, digital recordings have copy guard protections and making a digital copy is not possible. In this case you can only copy them in an analog manner.
•Some video recordings are
•When recording video, the source must be connected to the receiver using the same type of video cord (composite, or S video) as you used to connect the recorder to the receiver.
1Turn on the receiver.
2Press the MULTI CONTROL (or INPUT)
on the remote to select a source com- ponent.
3 Press RECEIVER.
4 Press the SIGNAL SELECT button to select the input signal (ANALOG or DIGITAL).
5 Start recording (tape deck, CD recorder, VCR, etc.)
6 Playback the source to be recorded.
74
En
