Using Other Functions
The PIONEER SR System: Operating other PIONEER components
Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the receiver's remote control at the remote sensor on the front panel of the receiver. The receiver then sends the remote control signals to the other devices via the CONTROL OUT terminal.
Receiver
PIONEER component with a CONTROL terminal
To CONTROL IN terminal of another PIONEER component with a CONTROL terminal
Remote Control
Memo:
•You can also control PIONEER components (and those made by other manufacturers) by pointing the receiver's remote control directly at the respective component. This type of operation does not require control cords. All you have to do is recall the appropriate stored settings (see page 67).
•If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able to use this unit's remote control.
•If you use this feature make sure an analog (audio and/or video) connection has been made between the units.
EXPERT
79
En
