Expert System Settings
Fine Channel Delay
The following steps show you how to adjust the delay level of your speakers more finely than in the NORMAL setup (see page 40). Adding a slight delay to some speakers is necessary to achieve proper sound depth, separation as well as an effective surround sound effect.
Follow steps
1 FINE CHANNEL DELAY should be
|
| selected, if it isn’t use the buttons |
|
| to select and press ENTER. |
| 2 | Use the buttons to adjust the |
|
| distance of the left channel. Press |
| ENTER. | |
| This channel will be the target reference which you use to | |
|
| |
|
| measure the other channels. |
| 3 | Use the buttons to select the |
|
| subsequent channel. Press ENTER. |
|
| Test tones will be output for the channel you want to |
|
| adjust and a reference channel. |
|
| Listen to the reference channel and use it to measure the |
|
| target channel. |
1 | 4 | Adjust the distance of each channel |
| using the buttons. | |
|
| Listen to the reference channel |
|
| and use it to measure the |
|
| target channel. Stand facing |
|
| the two speakers with your |
|
| arms outstretched pointing at |
|
| each speaker. Try to make the |
|
| two tones sound as if they are |
2 |
| arriving simultaneously at a |
| position slightly in front of you and between your arm |
span. The distance can be set within a range of 0.1 to 9.0 m in 0.1 m steps.
When you press ENTER you will automatically go to the next channel.
5Press ENTER to select a new channel. Repeat step 4 for every channel.
3 |
|
|
| If you want to change a setting before proceeding |
|
|
| Use the buttons to go back to the channel you want | |
|
|
to adjust and press ENTER. Then follow step 3.
6 When done select EXIT (if it's not already selected) and press ENTER.
Next, if you want, proceed to ACOUSTIC CAL EQ.
EXPERT
99
En
