Pioneer VSX-AX5i-G manual Connecting your TV, S Video, Component video, Composite Video

Models: VSX-AX5i-G

1 120
Download 120 pages 6.92 Kb
Page 16
Image 16
Connecting your TV

ConnectingYour EquipmentYour Equipment

Connecting your TV

Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.

Connect your TV to the jacks as shown below. Hook up with either component video, S video, or composite video cords (the quality descends in this order) but you must use the same type of video cords to hook up your DVD player (and all other video components) as you use to hook up your TV. If you plan to hook up your DVD player with component video cords hook up your TV with them as well. Composite video cords, which look just like regular RCA audio cords (see page 20) but have only one cable are the most common.

CAUTION:

In order to set up the receiver use MONITOR OUT 1 so that you can see the on-screen displays.

(AUDIO)

 

S400

TV/monitor

S400

 

S Video

S video cables produce clearer picture reproduction by sending separate signals for the luminance and the color.

Component video

The video signal is divided into the luminance (Y) signal and the color (PB and PR) signals. In this way, interference between the signals is avoided.

Composite Video

Composite video cords are the most common or standard video cord but also the lowest quality. The color on the connector is yellow to distinguish it from regular RCA audio cords which have white and red connectors (see page 20). It is important to use a true composite video cord and not an audio cord (though they look exactly the same) because the impedance is different and this will affect the picture quality.

Component Video Input Default Settings

If you use component video cords to hook up your video equipment it is easiest to do so following the default settings, which are listed below. Remember you must use component video cords from your video source (for example, a DVD player) to the receiver and from the receiver to your TV (or monitor). If you don't follow the default settings below you must assign the inputs you used with the "Assigning the Component Video Inputs" procedure (see page 90).

The default settings are:

COMPONENT VIDEO IN 1: DVD/LD

COMPONENT VIDEO IN 2: TV/SAT

16

En

Page 16
Image 16
Pioneer VSX-AX5i-G Connecting your TV, S Video, Component video, Composite Video, Component Video Input Default Settings