Pioneer VSX-AX5i-G Specifications multi-voltagemodel, Video Section Composite, Audio Section

Techno Tidbits and Problem-solving

Specifications (multi-voltage model)

Maximum Output Power		................................ 130 W/channel
		(1 kHz, THD 10.0 %, 8 Ω)
Continuous Power Output (DIN)
Front	100 W + 100 W (DIN 1 kHz, THD 1%,		8 Ω)
Center		100 W (DIN 1 kHz, THD 1%,	8 Ω)
Surround	100 W + 100 W (DIN 1 kHz, THD 1%,		8	Ω)
Surround Back
..................	100 W + 100 W (DIN 1 kHz, THD 1%,		8	Ω)
Rated Power Output		100 W + 100 W
		(20 Hz – 20 kHz, 0.09 %, 8		Ω)

Video Section (Composite)

Input (Sensitivity/Impedance)
LINE	1 Vp-p/75 Ω
Output (Level/Impedance)
LINE	1 Vp-p/75 Ω
Frequency Response
LINE	5 Hz to 10 MHz +–03dB
Signal-to-Noise Ratio	65 dB

Audio Section

Input (Sensitivity/Impedance)
PHONO MM	4.7 mV/47 kΩ
LINE	335 mV/47 kΩ
Frequency Response
PHONO MM	20 Hz to 20,000 Hz ± 0.3 dB
LINE	5 Hz to 100,000 Hz +–03dB
Output (Level/Impedance)
LINE	335 mV/2.2 kΩ
Tone Control
BASS	± 6 dB (100 Hz)
TREBLE	± 6 dB (10 kHz)
LOUDNESS	+4/+2 dB (100Hz/10 kHz)
	(at volume position -40dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE	101 dB

Signal-to-Noise Ratio
[DIN (Continuous rated power output/50 mW)]
LINE	92/65 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
LINE	83 dB

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers.

**Measured by Audio Spectrum Analyzer.

FM Tuner Section

Frequency Range		87.5 MHz to 108 MHz
Usable Sensitivity	Mono: 13.2 dBf, IHF (1.3 µV/75 Ω)
50 dB Quieting Sensitivity	..............................	Mono: 20.2 dBf
		Stereo: 38.6 dBf
Signal-to-Noise Ratio		Mono: 73 dB (at 85 dBf)
		Stereo: 70 dB (at 85 dBf)
Distortion		Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity		60 dB (400 kHz)
Stereo Separation		40 dB (1 kHz)
Frequency Response		30 Hz to 15 kHz (± 1 dB)
Antenna Input		75 Ω unbalanced

AM Tuner Section

Frequency Range	531 kHz to 1,602 kHz (9 kHz step)
	530 kHz to 1,700 kHz (10 kHz step)
Sensitivity (IHF, Loop antenna)		.................................350 µV/m
Selectivity		25 dB
Signal-to-Noise Ratio		50 dB
Antenna		Loop antenna

Miscellaneous

Power Requirements

...............................AC 110/120–127/220/230–240 V, 50/60 Hz

Power Consumption		600 W
Power Consumption in Standby mode		.......................... 0.9 W
Dimensions	420 (W) × 188 (H) × 464 (D) mm
Weight (without package)		19.9 kg

Video Section (S jack)

Input (Sensitivity/Impedance)	.............................. 1 Vp-p/75 Ω
Output (Level/Impedance)	1 Vp-p/75 Ω
Frequency Response	5 Hz to 10 MHz +–03dB
Signal-to-Noise Ratio	65 dB

Video Section (Component)

Input (Sensitivity)	1 Vp-p/75 Ω
Output (Level/Impedance)	1 Vp-p/75 Ω
Frequency Response	5 Hz to 40 MHz +–03dB
Signal-to-Noise Ratio	65 dB

Furnished Parts
FM wire Antenna	1
AM loop Antenna	1
“AA” IEC LR6 batteries	4
Remote Control Unit	1
Microphone for Auto Surround Sound Setup	1
Microphone Stand for Auto Surround Sound Setup	1
AC Power Cord	2
Operating Instructions	1
Flat-bladed converter plug	1
Antenna Adaptor	1

NOTE:

Specifications and the design are subject to possible modi- fications without notice, due to improvements.

118

En