»When sleep timer is deactivated, disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock.The last selected source is activated to play at a preset time.
1Ensure that you have set the clock correctly.
2Press and hold TIMER on the remote control for more than 2 seconds.
»The hour digits are displayed and begin to blink.
3Press / to set the hour.
4Press TIMER to confi rm.
»The minute digits are displayed and begin to blink.
5Press / to set the minute.
6Press TIMER to confi rm.
» The timer is set and activated.
To select a source to activate as the alarm sound:
1Press DISC, TUN, USB, AUX/MP3 LINK, or TAPE/AUX to select a source.
•For DISC: ensure that there is a disc in the disc compartment.
•For TUNER: tune to a radio station.
•For USB: connect a USB device.
•For AUX/MP3 LINK: ensure that the external device is connected and turned on.
•For TAPE: ensure that there is a tape in the tape deck and press the button.
2Press to switch the unit to standby.
Activate and deactivate alarm timer
1Press TIMER repeatedly to activate or deactivate timer.
»If timer is activated, the display shows .
»If timer is deactivated, disappears on the display.
Listen through headphone
1Plug a headphone into the socket on the unit.
20EN