3 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Phiips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•Ensure that the colors of the speaker wires and terminals are matched.
1Hold down the socket fl ap.
2Insert the stripped part of the wire completely.
•Insert the right speaker wires to “HIGH CH R/LOW CH R”, left speaker wires to “HIGH CH L/LOW CH L”.
•Insert the red/blue wires to “+”, black/grey wires to
3Release the socket fl ap.
a 
b c
Speaker | Speaker |
(Right) | (Left) |
| L |
| R |
| L |
| R |
| HIGH CH |
Install remote control batteries
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
•Risk of decreased battery life! Never mix different brands or types of batteries.
•Risk of product damage! When the remote control is not used for long periods, remove the batteries.
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity
3Close the battery compartment.
3 1
2 
12EN
