Basic Functions
English |
IMPORTANT: |
Before you operate the system, complete |
the preparation procedures. |
Switching the system on
●Press y on the main set.
➜The system will switch to the last selected source.
●Press DISC, TUNER, AUX IN, or MP3 LINK (or DISC, TUN, AUX, or MP3 LINK on the remote control).
➜The system will switch to the selected source.
To switch the system to standby mode
●Press y (or y on the remote control).
➜ The volume level (up to a maximum volume level of 15), interactive sound settings, last selected source and tuner presets will be retained in the player's memory.
Adjusting volume and sound
1 Adjust the VOLUME control knob or press VOL+/- on the remote control to increase or decrease volume.
➜ Display shows the volume level UoL and a number from
2Press DBB to switch bass enhancement on or off.
➜Display shows: DBB if the DBB is activated.
3Press JAZZ, ROCK, TECHNO or OPTIMAL on the system or press DSC on the remote control repeatedly to select the desired sound effect: OPTIMAL, JAZZ,TECHNO or ROCK.
➜The selected DSC is shown.
●To cancel the DSC setting, press DSC on the remote control repeatedly until the related DSC disappears.
4Press MUTE on the remote control to stop sound playback instantly.
➜ Playback will continue without sound and the display shows MUTE.
●To start sound playback you can:
–press MUTE again;
–adjust the volume controls.
Power-saving automatic standby
The
12