Clock/Timer
English
Setting the timer
●The system can switch on to DISC,TUNER, or MP3 LINK mode automatically at a preset time, serving as an alarm to wake you up.
IMPORTANT!
–Before setting the timer, ensure that the clock is set correctly.
–The timer will always be switched on after it has been set.
–The volume of the timer will increase gradually from the minimum level to the last tuned volume level (If the last tuned volume level is less than 15, it will increase gradually from the minimum level to 15).
1Press TIMER on the remote control.
➜The clock digits for the hours flash.
2Press ¡1 / 2™ on the system (or ¡ / ™ on the remote) to set the hours.
3Press TIMER again.
➜The clock digits for the minutes flash.
4Press ¡1 / 2™ on the system (or ¡ / ™ on the remote) to set the minutes.
5Press TIMER to confirm the time.
➜The timer is now activated and display shows
.
Notes:
–When the preset time is reached, the last selected source will be played automatically.
–During timer setting, if no button is pressed within
–If remote control is used, timer/clock setting is available only in DISC and TUNER modes.
To deactivate the timer,
●Press TIMER once or more.
➜ disappears if the timer is deactivated.
18