XP SBC HC 410/00
General information | Controls |
Easy transmission
The FM headphone is able to receive signals from the transmitter, even through barriers such as doors, walls and windows.
Multiple headphones with one transmitter
An additional number of headphones and/or wireless speakers can be used with a single transmitter if they:
-operate in the 433 MHz band
-can detect a 19 kHz pilot tone
Please consult the appliance’s electrical specification sheets for confirmation on compatibility.
Kit contents
This FM headphone system consists of the following accessories:
1 x SBC HC412 FM transmitter
1 x SBC HC415 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC adapter (for UK: SBC CS030/05 12 Volt/ 200 mA AC/DC adapter)
2 x rechargeable batteries LR03/AAA (NiMH), 550 mAh
1 x 3.5 mm stereo plug to 2x RCA audio cable (2 m)
1 x 3.5 mm plug to 6.3 mm stereo adapter plug
Transmitter (figure 1)
1Power indicator – lights up when audio signals are detected at the audio input.
2Recharging indicator – lights up when headphone is replaced on the
FM transmitter. Completely flat batteries will be fully charged after about 16 hours.
3Recharging contact – make sure you align your headphone to this contact for recharging.
4DC power – connect to the 12 Volt/200 mA AC/DC adapter
53.5 mm stereo headphone audio input – connects your FM transmitter to an audio source
6Line audio input – alternative connection to an audio source.
IMPORTANT
Use only 1 of the audio inputs:
3.5 mm stereo headphone audio input OR the line audio input!
Using both audio inputs at the same time may damage your FM wireless system or your audio source!
7Channel switch – select one of
3 channels for best reception. We advise you to select channel 1 as a first option.
8Controls plate
English
5
