4
6Discard hot water from carafe.
Let the appliance cool down for at least 3 minutes before you start brewing coffee.
HD7610 only: Setting the Clock
1When you plug the cord into the electrical outlet, the word 'SET' appears in the display.
2To set the clock: press the 'H' button.
The display will show 0:00 and the first digit (the hour indication) will be blinking.
3Adjust the blinking digit by pressing the 'H' button again.
To advance the hours quickly, keep the button pressed in until you have almost reached the correct hour. Then release the button and set the exact hour by pressing the button briefly until the display shows the correct hour.
P.M. hours are indicated by a " " mark in the display window.
4Set the minutes by pressing the 'M' button.
Proceed in the same way as for setting the hours, but now use the 'M' button instead of the 'H' button.
NOTE: After a power outage of more than 1 minute, you will have to set the clock again.
Using the Anti-Chlorine Filter
•This coffee maker features an
The filter cannot change unhygienic water into drinking water.
5
1Remove the plastic packaging and rinse the (new) water filter well with fresh tap water.
2Place the filter into the lower part of the special cassette.
3Close the 2 sections of the cassette together.
4Place the cassette with the filter into the water reservoir of the Coffee Maker.
5Slide the indicator to the number which corresponds with the month (January = 1, February = 2, etc.)
This is a reminder of when you installed the filter, so it can be replaced at the correct time. It is recommended to change the filter after
3 months.
Never use the filter longer than 6 months.
6For coffee making pour the water into the water reservoir via the filter cassette opening.
•Rinse the filter well with water if the Coffee Maker has not been used for a couple of days.
•Replace the filter if it is not used for a longer period.
•When replacing the
7Remove the filter before descaling the Coffee Maker.
Only use the