Philips HD7830 Cleaning, Flushing, Descaling, Frost-free storage, Replacement, Environment, Tips

Models: HD7830

1 4
Download 4 pages 43.65 Kb
Page 3
Image 3
Tips

The light rings around the 1-cup button q and the 2-cup button qq indicate if there is still enough water left for brewing one or two cups of coffee. If there is not enough water left in the water reservoir for brewing two cups of coffee, the light ring around the 2-cup button qq will not go on and this button cannot be operated.

,The SENSE \ coffee machine starts brewing.

-The machine automatically supplies the selected amount of water.

-You can interrupt the brewing process at any time by pressing the on/off button 3. If you switch the machine back on after having interrupted the brewing process, the machine will not complete the interrupted brewing cycle.

Do not remove the water reservoir during a brewing cycle, as this will cause the machine to draw in air.When this happens, the next cup will only be partly filled.

Note: If you only get a small quantity of coffee or no coffee at all out of the machine, you have not flushed the machine properly before first use. As a result, the boiler is not or not completely filled. Flush the machine properly (see chapter ‘Preparing the machine for use’) before you brew another cup of coffee.

11Remove the coffee pod(s) after use by lifting the pod holder out of the machine and emptying it.

Be careful when doing this, for there may still be some water/coffee on the coffee pod(s).

Tips

,By rinsing the pod holders, the coffee collector and the coffee spout regularly, you will make sure that the coffee always tastes optimally.

,The SENSEO\ coffee will taste best if you stir it before drinking it.

,If you intend to make another cup of SENSEO\ coffee later, just leave the coffee machine switched on.The machine will automatically switch itself off after 1 hour. (Fig. 22)

Cleaning

Never immerse the SENSEO\ coffee machine in water.

Never clean the machine by flushing it with the lid open.

1Always unplug the machine before cleaning it.

2Clean the outside of the machine with a moist cloth.

3Remove the coffee collector (Fig. 23).

4Take the coffee spout out of the machine by sliding it upwards (Fig. 24).

The coffee spout can only be taken out after the coffee collector has been removed.

,You can disassemble the coffee spout for more thorough cleaning! (Fig. 25)

5Clean the coffee spout, the coffee collector and the drip tray in hot water, if necessary with some washing-up liquid, or in the dishwasher (Fig. 26).

6Hold the cup tray in your hand while cleaning it with hot water, if necessary with some washing-up liquid (Fig. 27).

The cup tray can also be cleaned in the dishwasher.

To clean the cup tray, always remove it from the machine, as it might prove sharp when handled incorrectly.Always handle it carefully.

7Clean the pod holders in hot water, if necessary with some washing-up liquid, or in the dishwasher. (Fig. 28)

Check if the sieve in the centre of the pod holder is clogged. If this is the case, unclog the sieve by rinsing the pod holder under a running tap. Use a washing-up brush to clean the sieve, if necessary.

8Clean the water reservoir in hot water, if necessary with some washing-up liquid. (Fig. 29)

Note: If you are using a washing-up brush, be careful not to damage the valve in the bottom of the water reservoir.

9Do not use an object with sharp edges to clean the water inlet on the machine (Fig. 30).

10Rinse the parts with fresh water after cleaning and put them back into the machine.

11Clean the water distribution disc with a moist cloth (Fig. 31).

4222.001.9946.2

Be careful when you do this; make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine will start leaking!

Flushing

If you have not used the coffee machine for three days,

you have to flush it with fresh water before you use it

again.

Flush the machine in the following way:

1Fill the water reservoir with cold water up to

the MAX indication and put it back into the machine. (Fig. 3)

2Put the 1-cup pod holder q or the 2-cup pod holder qq in the machine without pod(s). (Fig. 13)

3Put a bowl (with a capacity of at least 1500 ml) under the coffee spout to collect the water (Fig. 8).

4Press on/off button 3 (1) and subsequently press the 1-cup button q and the 2-cup button qq briefly at the same time (2). (Fig. 32)

The machine fills itself with water from the water

reservoir. While this happens, water comes out of

the spout. When the flushing cycle is finished, the machine switches itself off. During the flushing cycle,

the machine produces more noise than during a regular brewing cycle.

Descaling

Regular descaling will prolong the life of the coffee machine and will guarantee optimal brewing results for a long time.

,When you need to descale the machine, the descaling indication b appears on the display.This happens after 500 cups have been brewed.After another 8 cups, the descaling indication b disappears from the display

(whether or not you have performed the descaling procedure). (Fig. 33)

1Fill the water reservoir up to the MAX indication with descaler and water according to the instructions on the package of the descaler.Then put the water reservoir back into the coffee machine. (Fig. 3)

Use a liquid descaler based on citric acid.

2Press the on/off button 3. (Fig. 9)

The machine is ready for use when the indicator light burns continuously.

3Place the 1-cup pod holder q in the coffee machine, preferably with a used coffee pod in it. Close the lid and make sure it is properly locked.

We advise you to put a used coffee pod in the pod holder when you descale the machine.This pod will serve

as a ‘filter’ to prevent the sieve in the pod holder from

getting clogged with scale residues.

4Put a bowl with a capacity of at least 1500 ml under the spout openings to collect the mixture of descaler and water. (Fig. 8)

5Press the 2-cup button qq for 2 cups and let the machine operate. Repeat this until the water reservoir is empty. (Fig. 34)

Never descale the SENSEO\ coffee machine with the lid open. Make sure the lid is properly locked.

6Repeat steps 1 to 5 with a new mixture of descaler and water.

7Empty the water reservoir to remove the mixture of descaler and water.

8Rinse the machine at least 3 times by repeating steps 1 to 5, now using fresh water.

,Do not refill the water reservoir with used hot water.

9Clean the pod holder after descaling to prevent the sieve in the centre from getting clogged.

Frost-free storage

If the coffee machine has already been used and

therefore has been flushed with water, it may only be

used and stored in a frost-free place to prevent it from becoming damaged.

Replacement

All removable parts can be ordered from your Philips dealer or a Philips service centre.

Environment

,Do not throw the machine away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling.

By doing this you will help to preserve the environment (Fig. 35).

Guarantee & service

If you need service or information or if you have a

problem, please consult the worldwide guarantee leaflet or visit our website at www.philips.com.You can also

contact the Philips Customer Care Centre in your country; they will be happy to help you.

The telephone number for the United Kingdom is: 0845- 6010354.

You will find the telephone numbers for other countries in the worldwide guarantee leaflet. If there is no

Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.You

will find their address and fax number in the worldwide guarantee leaflet.

The purchase of the Philips SENSEO\ coffee machine does not exhaust any of the rights of Sara Lee/Douwe Egberts or Philips under any of their patents nor does it confer upon the purchaser a licence under these patents.

3/4

Page 3
Image 3
Philips HD7830 Cleaning, Flushing, Descaling, Frost-free storage, Replacement, Environment, Guarantee & service, Tips