Philips HP 405/355 manual General Description pag, Soft-Pressure bending head, Bathroom use

General Description (fig. 5) (pag. 3)

AToothbrush B Drive shaft

C ”Soft-Pressure” bending head

D On/off switch. Press to switch on. Press again to switch off. E Click-on brushes (colour-coded for personal use)

F Charge unit with mains cord

G Holder for click-on brushes (HP 405 only)

H Pilot light (illuminates green during charging) (HP 405 only)

I Mounting-plate, screws and rawlplugs for wall mounting (HP 405 only)

Bathroom use

• Mount to a wall (HP 405 only) or place the charge unit where it cannot accidentally fall into water.

• As the toothbrush itself is waterproof you may choose to use it while having a shower or bath.

Wall mounting (fig. 6-7) (HP 405 only)

How to charge (fig. 8-10)

•Ensure that the appliance is switched off when (re)charging.

•Before first use charge for at least 12 hours.

•In normal use, the toothbrush is recharged after each use by just placing it back into the connected charge unit.

How to use (fig. 11-15)

•Let the toothbrush do the work for you: just guide the bristle carefully along the teeth. Ensure that the brush touches the entire tooth surface as well as a small section of the gums.

•If the head clicks into a straight position during brushing, this means that you have applied too much pressure (fig. 15).

•Also refer to the provided Tooth Brushing Instructions card.

6