Exmark Lazer Z CT manual

Models: Lazer Z CT

1 48
Download 48 pages 37.94 Kb
Page 11
Image 11
FIGURE 1

FIGURE 1

Progressively greater care is needed as the slope increases.

Always avoid sudden starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly off the slope.

Avoid sudden starts when mowing uphill. Mower may tip backwards.

Be aware that loss of traction may occur going downhill. Weight transfer to the front wheels may cause drive wheels to slip and cause loss of braking and steering.

Watch for ditches, holes, rocks, dips, and rises that change the operating angle, as rough terrain could overturn the machine.

Remove or mark obstacles such as rocks, tree limbs, etc. from the mowing area. Tall grass can hide obstacles.

Use extreme care with grass catchers or attachments. These can change the stability of the machine and cause loss of control.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

1.4.5A Rollover Protection System (roll bar) is installed on the unit.

WARNING

POTENTIAL HAZARD

There is no rollover protection when the roll bar is down.

WHAT CAN HAPPEN

Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning.

HOW TO AVOID THE HAZARD

Keep the roll bar in the raised and locked position and use seat belt.

Lower the roll bar only when absolutely necessary.

Do not wear seat belt when the roll bar is down.

Drive slowly and carefully.

Raise the roll bar as soon as clearance permits.

6

Page 11
Image 11
Exmark Lazer Z CT manual