Philips HQ6906, HQ6900 user manual Extra-thorough cleaning, Trimmer HQ6946/HQ6940 only

English 9

4Remove the shaving heads (cutters and guards) one by one and clean them with the cleaning brush supplied.

Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.

5Clean the cutter with the short-bristled side of the cleaning brush. Brush carefully in the direction of the arrow.

6 Brush the guard.

7Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit, push it down (1) and turn the wheel clockwise (2).

8Put the shaving unit back onto the shaver.

Extra-thorough cleaning

For extra-thorough cleaning, put the shaving heads in a degreasing liquid (e.g. alcohol) every six months.To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the

inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads.

Trimmer (HQ6946/HQ6940 only)

Clean the trimmer every time you have used it.

1Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver.