6ENGLISH
How to use the appliance
1Wash the fruit and/or vegetables and cut them into pieces that fit into the chute.
2Switch the appliance on by pressing the on/off switch.
The appliance will only function if the jug and the lid have been properly mounted onto the motor unit.
C 3 Put the pieces in the chute and press them gently down with the pusher.
Do not exert too much pressure on the pusher; this could affect the quality of the end result and it could even cause the sieve to come to a halt.
Never put an object or your fingers in the chute.
4When the flow of juice into the jug has stopped, switch the appliance off and wait until the sieve has stopped rotating completely.
Do not fill the jug beyond the MAX indication to prevent juice from being spilt. If you want to extract a large quantity of juice, empty the jug at a certain point during the process.
Do not let the appliance run continuously for more than two minutes. If you have not finished extracting juice, switch the appliance off and allow it to cool down for two minutes before you continue.
C 5 Pour out the juice.
It is not necessary to disassemble the juice extractor.
If the pulp container is full:
1Switch the appliance off and wait until the sieve has stopped rotating completely.
2Empty the pulp container.
3Reassemble the juice extractor and continue.
