Philips HR 6988 manual Park, Storage, Replacing the dustbag, Replacing the Active Carbon filter

Park

If you wish to interrupt vacuum cleaning, you can place the tube clip into the rest (fig. 15). You can slide the clip along the tube to change the height.

In one movement the tube is parked in a convenient position (fig. 16).

Storage

-Switch the vacuum cleaner off (fig. 17).

-Remove the mains plug from the wall socket.

-Rewind the mains cord by pressing the cordwinder pedal (i) (fig. 18).

-Hitch the lower tube onto the vacuum cleaner (fig. 19-20). You can slide the clip along the tube to change the height.

Replacing the dustbag

•Only use this vacuum cleaner with the original Philips dustbags types Oslo+ or Oslo+

Hygiene (closeable).

Damage due to using other dustbags is not covered by guarantee.

•The "dustbag full indicator" will indicate when

the dustbag is full (fig. 21).

-Switch the vacuum cleaner off (fig. 17).

-Remove the hose (fig. 2).

-Open the cover (fig. 22).

-Remove the cassette with the full dustbag (fig. 23).

-Remove the full dustbag from the cassette by pulling the cardboard tag (fig. 24).

This automatically closes the dustbag (type Oslo+ Hygiene).

-Discard the full dustbag.

-Slide the cardboard front plate of the new dustbag into the two slots of the cassette as far as possible (fig. 25-26).

-Position the cassette and the new dustbag in the vacuum cleaner (fig. 27).

-Bend the rear part of the dustbag downwards.

-Close the cover ("Click!") (fig. 28).

Note: If no dustbag has been placed into the cassette, the cover cannot be closed.

Replacing the Active Carbon filter

Replace this filter once a year or when you notice that smell absorbtion becomes less effective.

After having removed the full dustbag, you can see the removable holder with the old Active Carbon filter. You can take the holder to the dustbin and shake the filter out there. Hygienic: you need not touch the filter (fig. 30).

Position the new filter in the holder (fig. 29-31). Press the holder with the new filter firmly into place to ensure that it fits in correctly at the bottom.

Replacing the S-Class filter

To guarantee optimum air filtering, the S-Class filter needs replacement at least once a year.

-Open the filter holder (fig. 32).

-Remove the old filter (fig. 33).

-Positon the S-Class filter as indicated (fig. 34). Ensure that the protruding notches fit well in the apertures.

-Push the S-Class filter well into place (fig. 35).

-Position the filter holder in the vacuum cleaner and close the filter holder (“Click!”) (fig. 36).

Replacing the mains cord

If the mains cord of this appliance is damaged, it must only be replaced by Philips or their service representative, as special tools and/or parts are required.

Extra accessories

To enable you have even better profit from your Philips Vision Plus vacuum cleaner, some extra accessories are available from your dealer:

Turbo nozzle HR 6988 (fig. 37)

This turbo nozzle has been especially designed for enhanced cleaning of rugs and carpets. The rotating brush effortlessly picks up small threads, hairs, fluff and more difficult to vacuum particles.

5