Philips HS8420/40 manual Shaving Unit After Each Use, Shaving Unit Once a Month

18ENGLISH

◗Never dry the Shaving Unit with a towel or tissue as this may damage razor heads.

◗Do not use abrasives, scourers or liquids such as acetone to clean the appliances.

Shaving Unit: After Each Use

◗It is recommended that you clean the Shaving Unit thoroughly after each use to maintain optimal shaving performance.

1Press the on/off button to turn razor ON.

2Rinse Shaving Unit under hot tap water by letting the water run in and around all the openings for at least 30 seconds.

sec		C 3 You can also immerse the Shaving Unit in
30
C	F	hot water for at least 30 seconds.
		Make sure the razor is ON to thoroughly remove
		any residue.
		BE CAREFUL TO TEST WATER FIRST SO AS NOT
		TO BURN OR SCALD HANDS.

4Turn razor OFF and shake off excess water.

5You can store the razor in the charging stand.

ENGLISH 19

6Put the Protective Razor Head Cap on razor to protect heads.

Note: If lotion build-up has occurred, remove Shaving Unit and soak for a few minutes under hot water or a degreasing liquid (e.g. alcohol). Be sure to thoroughly rinse Shaving Unit under tap water before using razor.

Shaving Unit: Once A Month

Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.

1Turn razor OFF.

C2 Remove Shaving Unit from razor by pulling

Shaving Unit straight up from razor.

C3 Using your thumb and forefinger turn the razor head clockwise and lift the comb

with water off of Shaving Unit.

4Remove and clean one set of cutters and combs at a time.