SETUPS

Connection Speed

You can set connection speed as your preference. (The default setting is “Auto”.)

1)Follow steps 1) to 4) in “Connection Test” on page 49.

2)Use [K / L] to select “Enable(Custom)”, then press [OK].

3)Use [K / L] to select “Connection Speed”, then press [OK].

4)Use [K / L] to select the desired setting, then press [OK].

“Auto”:

Set the appropriate connection speed automatically, in accordance with your network environment.

“10BASE Half”:

Set the connection speed to “10BASE Half”.

“10BASE Full”:

Set the connection speed to “10BASE Full”.

“100BASE Half”:

Set the connection speed to “100BASE Half”.

“100BASE Full”:

Set the connection speed to “100BASE Full”.

5)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Note

•Choose a connection speed in accordance with your network environment.

•The network connection may be disabled depending on the device, when the settings are changed.

BD-Live Setting

You can limit Internet access for BD-Live discs. (The default setting is “Allow”.)

1)Follow steps 1) to 4) in “Connection Test” on page 49.

2)Use [K / L] to select “Enable(Custom)”, then press [OK].

3)Use [K / L] to select “BD-Live Setting”, then press [OK].

4)Use [K / L] to select the desired setting, then press [OK].

“Allow”:

Internet access is permitted for all BD-Live contents.

“Limited Allow”:

Internet access is permitted only for BD-Live contents which have content owner certificates. Internet access without the certificates is prohibited.

“Prohibit”:

Internet access is prohibited for all BD-Live contents.

5)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Network Status

You can check the status of network settings.

1)Follow steps 1) to 4) in “Connection Test” on page 49.

2)Use [K / L] to select “Enable(Custom)”, then press [OK].

3)Use [K / L] to select “Network Status”, then press [OK].

•Network setting list will be displayed.

•MAC address of this unit will be displayed in the list.

4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Disable

home A“Settings” A“AdvancedSetup” A“Others” AConnection”“Network A“Disable”

Deactivate all the network connection and settings.

1)Follow steps 1) to 4) in “Connection Test” on page 49.

2)Use [K / L] to select “Disable”, then press [OK].

3)Use [K / L] to select “Yes”, then press [OK].

4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Note

•The network connection can be reactivated by setting the network connection to “Enable(Easy)” or “Enable(Custom)”.

52 EN