Use your SoundBar, Before you start, Adjust the volume

5 Use your SoundBar

This section helps you use the SoundBar to play audio from connected devices.

Check that you make the necessary connections.

Press the Source buttons to select the audio output of the connected device.

To increase or decrease volume, press VOL +/-.

•• The LED indicator on the front panel lights up for five seconds when the volume is set to maximum.

To mute sound, press MUTE.

»» The LED indicator on the front panel blink continuously.

•• To restore the sound, press MUTE again or press VOL +/-.

8EN

This section helps you choose the ideal sound for your video or music.

Change the high frequency (treble) or low frequency (bass) settings of the SoundBar to suit your video or music.

Press TREBLE +/- or BASS +/- to increase or decrease treble or bass.

•• The LED indicator on the front panel lights up for five seconds when the treble or bass is set to maximum.

DVS (Dolby Virtual Speaker) technology creates a highly compelling 5.1-channel listening experience from as few as two speakers.

Press SURROUND to switch DVS mode or stereo mode.

»» In DVS mode, the DVS indicator lights up on the top panel.

For quiet listening, decrease the volume of loud sounds when you play discs. Night mode is only available for Dolby encoded DVD and Blu-ray discs.

Press and hold SURROUND to switch night mode on or off.

»» When the night mode is on, the indicators dim.