6.Select “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS” in turn, and enter each address number with cursor buttons and number buttons, then press [OK].

•Enter the DNS addresses provided by your Internet provider.

•If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and assign the same DNS address.

 

Please enter your

IP Address

● xxx. xxx. xxx. xxx

 

 

 

 

network settings.

 

 

 

 

 

 

 

Subnet Mask

● xxx. xxx. xxx. xxx

 

 

 

Default Gateway

● xxx. xxx. xxx. xxx

 

 

 

Primary DNS

● xxx. xxx. xxx. xxx

 

 

 

Secondary DNS

● xxx. xxx. xxx. xxx

 

 

Continue

 

 

 

 

Cancel

 

 

 

 

 

 

 

 

7.Use [] to select “Done”, then press [OK].

8.Use [] to select “Continue”, then press [OK].

9.Use [] to select “Yes” or “No” for proxy server, then press [OK].

•If you use proxy server, select “Yes” to go to the next step.

•If you do not use proxy server, select “No” to go to step 13.

10.“Proxy Address” setting screen will appear. Enter proxy address with cursor buttons, number buttons and color key.

Proxy Address

Please input the Proxy Address with keypad or software keyboard.

http://xxxxx.xx.xx

 

 

Done

Cancel

Clear

a/A/@

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[

]

:

Move the highlight.

[the Number buttons]

:

Enter numbers or letters.

[OK] : Enter the highlighted number / letter.

*[Red] : Set the entered number or letter. [Green] : Cancel the network setting.

*[Blue] : Clear the entered number or letter.

[Yellow] : Switch between abc, ABC and @!?.

*These buttons can be used in other network settings.

11.Press [Red] to go to the “Proxy Port” setting screen. Enter proxy port number with number buttons.

EN

Proxy Port

Please input the Proxy Port.

xxxxxx

Cancel Clear Done

12. Use [] to select “Done”, then press [OK].

13. Connection speed setting screen will appear. Use

[] to select the desired setting, then press [OK]. (The default setting is “Auto”.)

14. BD-Live™ setting screen will appear. Use [] to select the desired setting, then press [OK].

(The default setting is “Allow”.)

“Allow”:

Internet access is permitted for all BD-Live™ contents.

“Limited Allow”:

Internet access is permitted only for BD-Live™ contents which have content owner certificates. Internet access without the certificates is prohibited.

“Prohibit”:

Internet access is prohibited for all BD-Live™ contents.

15.Connection test confirmation screen will appear. Select “Yes” to start the connection test and the test result will appear right after the connection test finishes.

16.Press [OK] to go back to the setup menu, or press

[ (home)] to exit.

DNote for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”

•The range of input numbers is between 0 and 255.

•If you enter a number larger than 255, the number will automatically be reset to 255.

•When you enter a wrong number, select “Clear” to clear. (The number will be reset back to “0”.)

•If you want to enter a 1 or 2-digit number in one cell,

press [ ] to move on to the next cell.

DNote for “Proxy Address” and “Proxy Port”

•The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)

•For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.

•Choose a connection speed in accordance with your network environment.

•When the settings are changed, the network connection may be disabled depending on the device.

EN - 41