„Wireless

If you connect this unit to the Wi-Fi network, select “Wireless” and set up necessary settings.

Please make a note of your Wi-Fi network name (SSID) and its WEP / WPA key before proceeding with the setup.

Auto Scan

Search for Wi-Fi networks automatically and select the Wi-Fi network name (SSID) from the list.

1.Follow steps 1 to 2 in “Auto Setup” on page 40.

2.Use [] to select “Wireless”, then press [OK].

3.Use [] to select “Auto Scan”, then press [OK].

•This unit will start searching for Wi-Fi networks automatically.

4.The result of Wi-Fi network searching will be displayed.

Use [] to select the appropriate Wi-Fi network name (SSID), then press [OK].

•If you select an SSID without “ ”, please go to step 6.

Please select the

Access 1

access point.

 

Access 2

 

Access 3

 

Access 4

 

Access 5

Rescan

Access 6

Cancel

Access 7

 

 

 

5.“Access Point Setting (Auto Scan)” screen will appear. Enter the WEP / WPA key of the selected Wi-Fi network using cursor buttons, number buttons and color key, then press [Red].

•If you do not know the WEP / WPA key for your Wi-Fi network, ask your ISP or the person who set up your Wi-Fi network.

Access Point Setting (Auto Scan)

Please input the WEP/WPA key with keypad or software keyboard.

XXXXXXXXXX_

Done Cancel Clear a/A/@

6. Use [] to select “Continue”, then press [OK].

Please confirm the

SSID

● Access 1

setting.

 

 

 

Security

● WPA-PSK(AES)

 

WEP/WPA Key

● XXXXXXXXXX

Continue

 

 

Rescan

 

 

Cancel

 

 

 

 

 

7.Use [] to select “Auto Setup” or “Manual Setup”, then press [OK].

•If you select “Auto Setup”, follow step 5 in “Auto Setup” on page 40.

•If you select “Manual Setup”, follow steps 3 to 12 and 14 to 16 in “Manual Setup” on page 40.

DNote

•The internal wireless LAN supports following specifications.

- Wi-Fi standards

:IEEE 802.11 b/g/n

- Frequency spectrum

:2.4 GHz

- Security protocol

:WEP / WPA / WPA2

Manual Entry

Set up the connection to the Wi-Fi network manually by entering the Wi-Fi network name (SSID).

1.Follow steps 1 to 2 in “Auto Scan” on page 42.

2.Use [] to select “Manual Entry”, then press [OK].

3.“Access Point Setting (Manual Entry)” screen will appear.

Enter the SSID using cursor buttons, number buttons and color key, then press [Red].

4.Security mode selection screen will appear. Select the security mode of the entered SSID, then press [OK].

• If you select “None”, please go to step 6.

Please select the

None

security mode.

 

WEP

 

WEP-PSK(TKIP)

 

WEP-PSK(AES)

 

WPA-PSK(TKIP)

 

WPA-PSK(AES)

Cancel

 

 

 

5.“Access Point Setting (Manual Entry)” screen will appear.

Enter the WEP / WPA key of the Wi-Fi network using cursor buttons, number buttons and color key, then press [Red].

•If you do not know the WEP / WPA key for your Wi-Fi network, ask your ISP or the person who set up your Wi-Fi network.

6.Use [] to select “Continue”, then press [OK].

7.Use [] to select “Auto Setup” or “Manual Setup”, then press [OK].

•If you select “Auto Setup”, follow step 5 in “Auto Setup” on page 40.

•If you select “Manual Setup”, follow steps 3 to 12 and 14 to 16 in “Manual Setup” on page 40.

EN - 42