E n g l i s h
Connections (continued)
Step 4: Connecting to a | Step 5: Connecting FM/MW |
Progressive Scan TV | antennas |
(optional) |
|
FM
ANT
AM
ANT
VIDEO OUT | |||
Y | PB | PR | DIGITAL IN |
|
|
| |
L |
|
| VIDEO |
R |
|
|
|
TO AV SUBWOOFER |
fix the claw into the slot
➠ |
1
MW
antenna
FM
ANT
AM
ANT
FM
2antenna
VIDEO OUT
Y PB
L
R
IMPORTANT!
The progressive scan video quality is only possible when using Y Pb Pr and a progressive scan TV is required.
Option 3: Using Component (Y Pb Pr) Video jack
1Use the component video cables (red/ blue/green - not supplied) to connect the DVD system’s Y Pb Pr jacks to the corresponding component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.
2To hear the TV channels through this DVD system, use the audio cables (white/ red - supplied) to connect the DVD system’s TV IN jacks to the audio input jacks on the TV.
3Proceed to page 20 for detailed Progressive Scan set up.
1Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf, or attach it to a stand or wall.
2Connect the supplied FM antenna to the FM jack. Extend the FM antenna and fix its ends to the wall.
For better FM stereo reception, connect an external FM antenna (not supplied).
Helpful Hints:
–Adjust the position of the antennas for optimal reception.
–Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.
12
3139 246 16473