6Change settings
This section helps you to change the settings of your home theater.
Caution
•Most of the settings are already con gured with the best value for the home theater. Unless you have a speci c reason to change a setting, it is best to leave it at the default value.
Access the setup menu
1Press 
SETUP.
» The following menu appears.
Symbol Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2Select a setup menu, then press OK. See the following sections for information about how to change the settings of your home theater.
3Press
BACK to return to the previous menu, or press
SETUP to exit.
Note
•You cannot change a setting that is grayed out.
Change general settings
1Press
SETUP.
2Select [General Setup], then press OK.
3 Select and adjust the following settings: |
|
• [Disc Lock] : Restricts play to disc. |
|
Password (PIN code) is required to |
|
unlock the disc before play. |
|
• [Display Dim] : Changes the brightness |
|
of the display panel. |
|
• [OSD Language] : Selects the on- |
|
screen display menu language. |
|
• [Screen Saver] : Enables or disables |
|
| |
screen saver mode. If enabled, the |
|
screen enters idle mode after 10 | English |
pause or stop mode). | |
minutes of inactivity (for example, in |
|
• [Sleep Timer] : Sets a sleep timer to |
|
switch the home theater to standby |
|
after a speci c time. |
|
• [Auto Standby] : Enables or disables |
|
auto standby. If enabled, the home |
|
theater switches to standby after 30 |
|
minutes of inactivity (for example, in |
|
pause or stop mode). |
|
• [DivX® VOD Code] : Displays the |
|
DivX VOD registration code for the |
|
home theater. |
|
4 Press OK to con rm your choice. |
|
Note
•Before you purchase DivX videos and play them on the home theater, register the home theater on www.divx.com using the DivX VOD code.
Change audio settings
1 Press 
SETUP.
2Select [Audio Setup], then press OK.
3Select and adjust the following settings:
•[Speakers Volume] : Sets the volume of each speaker to obtain the ideal audio balance.
•[Speakers Delay] : Sets the delay time for center and rear speakers to obtain an equal audio transmission from all the speakers.
•[HDMI Audio] : Enables or disables HDMI audio output for the TV.
EN 13
