Preparing the Massage Jet for use
Mounting the base unit to the wall
C1Mount the base unit to the wall,using
2 screws (3.5x30mm) and 2 wall plugs (S5)
(not included).
To drill the holes in the right places,you can use
the drilling stencil on the last page of these
directions for use.
Do not allow the base unit to come into contact
with water.
2Push excess mains cord into the storage
space in the back of the base unit.
Using the Massage Jet
When you use the Massage Jet for the first time
or when you have not been using it for a couple
of days:
C1Click the jet tip onto the appliance.
C2Remove the water reservoir from the base
unit.
ENGLISH 5